Manual Bosch PSR 14,4 LI-2 (page 20 of 129) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

78124

Zoom out

Zoom in

1/129

20 | English

2 609 003 396 | (5.12.08) Bosch Power Tools

If the securing screw 14 is seated tightly, apply

a screwdriver to the screw head and loosen the

securing screw by giving a blow onto the handle

of the screwdriver.

Removing the Drill Chuck (see figure E)

Clamp the short end of an Allen key 15 into the

keyless chuck 2.

Place the machine on a stable surface (e. g. a

workbench). Hold the machine firmly and loos-

en the keyless chuck 2 by turning the Allen key

15 in rotation direction n. Loosen a tight-seated

keyless chuck by giving the long end of the Allen

key 15 a light blow. Remove the Allen key from

the keyless chuck and completely unscrew the

keyless chuck.

Mounting the Drill Chuck (see figure F)

The keyless chuck is mounted in reverse order.

The drill chuck must be tightened with a

tightening torque of approx. 7–9 Nm.

Screw the securing screw 14 in anti-clockwise

direction into the opened keyless chuck, tight-

ening torque approx. 1.5–2.5 Nm. Always use a

new securing screw, as the threads are covered

with a thread-locking compound that loses its

effect after multiple usage.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Operation

Starting Operation

Inserting the Battery

f Use only original Bosch lithium ion batter-

ies with the voltage listed on the nameplate

of your power tool. Using other batteries can

lead to injuries and pose a fire hazard.

Set the rotational direction switch 10 to the cen-

tre position in order to avoid unintentional start-

ing. Insert the charged battery 7 into the handle

so that it can be felt to engage and faces flush

against the handle.

Reversing the Rotational Direction

(see figure C)

The rotational direction switch 10 is used to

reverse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 11 actuated.

Right Rotation: For drilling and driving in

screws, push the rotational direction switch 10

left to the stop.

The indicator for right rotation 5 lights up

when the On/Off switch 11 is actuated

and the motor is running.

Left Rotation: For loosening or unscrewing

screws, push the rotational direction switch 10

right to the stop.

The indicator for left rotation 6 lights up

when the On/Off switch 11 is actuated

and the motor is running.

Setting the Torque

The required torque can be preselected in 25

steps with the torque preselection ring 3. With

the correct setting, the insert tool is stopped as

soon as the screw is screwed flush into the ma-

terial or when the set torque is reached.

Select a higher setting when driving out screws,

or set to the symbol “Drilling”.

Drilling

The safety clutch is deactivated in the “Drilling”

position.

OBJ_BUCH-900-001.book Page 20 Friday, December 5, 2008 9:09 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSR 14,4 LI-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PSR 14,4 LI-2

Bosch PSR 14,4 LI-2 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 127 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSR 14,4 LI-2 Manual

Product: