Manual Bosch PSM 80 A (page 16 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

78608

Zoom out

Zoom in

1/88

1 609 929 N20 | (13.12.07) Bosch Power Tools

16 | English

For reworking or polishing, especially of metal

and stone, use fleece/polishing cloth pad.

Depending on the desired surface quality of the

workpiece, different fleece types or polishing

cloth pads are to be used.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V can

also be operated with 220 V.

Switching On and Off

To start the machine, push the ON/Off switch 1

downward to position “1”.

To switch off the machine, push the On/Off

switch 1 upward to positon “0”.

Working Advice

f Wait until the machine has come to a stand-

still before placing it down.

The removal capacity during sanding is mainly de-

termined by the selection of the sanding sheet.

Only flawless sanding sheets achieve good sand-

ing capacity and extend the service life of the ma-

chine.

Pay attention to apply uniform sanding pressure;

this increases the working life of the sanding

sheets.

Intensifiying the sanding pressure does not lead

to an increase of the sanding capacity, but to in-

creased wear of the machine and the sanding

sheet.

For precise on-the-spot sanding of edges, cor-

ners and hard to reach areas, it is also possible

to work only with the tip or an edge of the sand-

ing plate.

A sanding sheet that has been used for metal

should not be used for other materials.

Use only original Bosch sanding accessories.

Maintenance and Service

Maintenance and Cleaning

f Before any work on the machine itself, pull

the mains plug.

f For safe and proper working, always keep

the machine and ventilation slots clean.

If the machine should fail despite the care taken

in manufacturing and testing procedures, repair

should be carried out by an after-sales service

centre for Bosch power tools.

In all correspondence and spare parts order,

please always include the 10-digit article number

given on the type plate of the machine.

Grain size

For the working of all

wooden materials

—180

For coarse-sanding, e. g.

of rough, unplaned

beams and boards coarse 40

For face sanding and plan-

ing small irregularities medium 80, 120

For finish and fine sand-

ing of hard woods fine 180

For the working of

paint/enamel coats or

primers and fillers

—180

For sanding off paint coarse 40

For sanding primer medium 80, 120

For final sanding of prim-

ers before coating fine 180

OBJ_DOKU-2339-002.fm Page 16 Thursday, December 13, 2007 2:40 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSM 80 A in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSM 80 A Manual

Product: