Manual Bosch PSM 80 A (page 15 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

78608

Zoom out

Zoom in

1/88

English | 15

Bosch Power Tools 1 609 929 N20 | (13.12.07)

Assembly

f Before any work on the machine itself, pull

the mains plug.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and metal

can be harmful to one’s health. Touching or

breathing-in the dusts can cause allergic reac-

tions and/or lead to respiratory infections of the

user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in con-

nection with wood-treatment additives (chro-

mate, wood preservative). Materials containing

asbestos may only be worked by specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your coun-

try for the materials to be worked.

Integrated Dust Extraction with Dust Box

(see Fig. A1

– A4)

Attach the dust box 2 onto the extraction outlet

5 until it latches.

To empty the dust box 2, pull off the dust box

downward.

Before opening the dust box 2, it is recommend-

ed to loosen the dust from the filter element by

gently striking it against a firm support (as shown

in the figure).

Hold the dust box 2 firmly, fold the filter element

6 upward and empty the dust box. Clean the thin

plates of the filter element 6 with a soft brush.

External Dust Extraction (see figure B)

Insert a vacuum hose 7 onto the extraction outlet 5.

Connect the vacuum hose 7 to a vacuum cleaner.

See the overview for connecting to various vacuum

cleaners at the end of these operating instructions.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially detri-

mental to health or carcinogenic, use a special

vacuum cleaner.

Replacing the Sanding Sheet

(see figure C)

When attaching a new sanding sheet, remove any

dust or debris from the sanding plate 3 (e. g. with

a brush).

To ensure optimum dust extraction, pay atten-

tion that the punched holes in the sanding sheet

match with the holes in the sanding plate.

The sanding plate 3 is fitted with Velcro backing

for quick and easy fastening of sanding sheets

with Velcro adhesion.

Before attaching the sanding sheet 4, free the

Velcro backing of the sanding plate 3 from any

debris by tapping against it in order to enable op-

timum adhesion.

The machine is fitted with 2 sanding sheets that

can be changed individually, depending on the

degree of wear.

f Only use the machine when both sanding

sheets are mounted.

f Only use sanding sheets with the same grain

size.

Position the sanding sheet 4 flush alongside one

edge of the sanding plate 3, then lay the sanding

sheet onto the sanding plate and press it against

it with a light turning motion in clockwise direc-

tion.

To remove the sanding sheet 4, grasp it at one of

the tips and pull it off from the sanding plate 3.

Sanding sheets of the Bosch Delta Sander can be

used.

Sanding accessories, such as fleece pads/polish-

ing cloth pads, are attached to the sanding plate

in the same manner.

Selecting the Sanding Sheet

Depending on the material to be worked and the

required rate of material removal, different sand-

ing sheets are available:

OBJ_DOKU-2339-002.fm Page 15 Thursday, December 13, 2007 2:40 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSM 80 A in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSM 80 A Manual

Product: