Manual Bosch PSB 530RA (page 23 of 133) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

473699

Zoom out

Zoom in

1/133

English | 23

Bosch Power Tools 2 609 004 192 | (5.10.09)

Changing the Tool

Keyless Chuck (PSB 600 RE/PSB 650 RE/

PSB 650 RA) (see figure E)

The drill spindle is locked by pressing the spin-

dle lock button 2. This makes quick and easy

changing of the tool in the drill chuck possible.

Note: The machine is equipped with a safety de-

vice for locking the drill spindle to protect it

against damage. The spindle lock button 2 can

only be pressed when the machine is at stand-

still.

– Before inserting the drilling tool, close the

keyless chuck 1 until the drilling spindle also

turns.

– Press the spindle lock button 2 several times

while slightly turning the keyless chuck 1 left

and right.

– As soon as the spindle lock button 2 can be

pressed in, continue to turrn the keyless

chuck 1 in one direction until the spindle lock

button 2 can be pushed down completely.

– Open the keyless chuck 1 by turning in rota-

tion direction n, until the tool can be insert-

ed. Insert the tool.

– Firmly tighten the collar of the keyless chuck

1 by hand in rotation direction o until the

locking action (“click”) is no longer heard.

This automatically locks the chuck.

– The locking is released again to remove the

tool when the collar is turned in the opposite

direction.

– To remove the drilling tool, repeat above

mentioned steps.

Keyless Chuck (PSB 530 RA) (see figure F)

Hold the rear sleeve 27 of the keyless chuck 1

tight and turn the front sleeve 26 in rotation di-

rection n, until the tool can be inserted. Insert

the tool.

Hold the rear sleeve 27 of the keyless chuck 1

tight and firmly turn the front sleeve 26 in rota-

tion direction o by hand.

Screwdriver Tools

When working with screwdriver bits 25, a uni-

versal bit holder 24 should always be used. Use

only screwdriver bits that fit the screw head.

For driving screws, always position the “Drill-

ing/Impact Drilling” selector switch 3 to the

“Drilling” symbol.

Replacing the Drill Chuck

f For power tools without spindle lock, the

drill chuck must be replaced by an author-

ised after-sales service agent for Bosch

power tools.

Removing the Drill Chuck (see figure G)

Clamp the short end of an Allen key 28 into the

keyless chuck 1.

Place the machine on a firm surface, e. g. a

workbench. Hold the machine firmly, press the

spindle lock button 2 and loosen the keyless

chuck 1 by turning the Allen key 28 in rotation

direction n. Loosen a tight keyless chuck by giv-

ing the long end of the Allen key 28 a light blow.

Remove the Allen key from the keyless chuck

and completely unscrew the keyless chuck.

Mounting the Drill Chuck (see figure H)

The keyless chuck is mounted in reverse order.

The drill chuck must be tightened with a

tightening torque of approx. 6–8 Nm.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V

can also be operated with 220 V.

Reversing the Rotational Direction

(see figure I)

The rotational direction switch 8 is used to re-

verse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 6 actuated.

OBJ_BUCH-379-003.book Page 23 Monday, October 5, 2009 9:57 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSB 530RA in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSB 530RA Manual

Product: