Manual Bosch PSB 530RA (page 22 of 133) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

473699

Zoom out

Zoom in

1/133

22 | English

2 609 004 192 | (5.10.09) Bosch Power Tools

To achieve optimum extraction results, please

observe the following notes:

– Pay attention that the extraction device faces

flush against the workpiece or the wall. This

also makes drilling at a right angle easier.

– When using the extraction device, always

work with the maximum speed.

– After reaching the desired drilling depth, pull

the drill bit out of the drill hole first and then

switch off the impact drill.

– Check the condition of the filter element 20

regularly. Replace a damaged filter element

immediately.

– The dust protection ring 17 can wear, espe-

cially when working with large drill-bit diam-

eters. Replace the dust protection ring when

worn/damaged.

Mounting the Extraction Device

Guide the extraction device 9 from the front to-

ward the bottom side of the impact drill. Pay at-

tention that the extraction device 9 faces flush

against the casing and that it is locked.

Cleaning the Extraction Device (see figure A)

Attach the locking latch 18 or empty the dust

collector 15 before placing down the extraction

device.

The dust collector 15 is sufficient for approx.

20 drillings with a drilling diameter of 6 mm.

When the extraction force diminishes or when

the level indicator 21 is full, the dust collector

15 must be emptied. For this, press on the rif-

fled surface of the release button 14 and take

off the dust collector 15.

Empty and clean the dust collector 15. Clean the

filter element 20 by gently striking or tapping

against it.

Check the filter element 20 for damage and re-

place it as required.

For this, as an example, pry off the holder of the

filter element 20 (n) and change the filter ele-

ment 20 including the holder (o). When placing

on the holder again, make sure that the rubber

gasket is inserted.

Reattach the dust collector 15 again and lock it

by pressing against the smooth surface of the

release button 14.

Removing the Extraction Device

For removal of the extraction device 9, push the

release button 19 to the right or left and pull off

the extraction device 9 toward the front.

Auxiliary Handle

f Operate your machine only with the auxilia-

ry handle 11.

The auxiliary handle 11 can be set to any posi-

tion for a secure and low-fatigue working pos-

ture.

Turn the wing bolt for adjustment of the auxilia-

ry handle 10 in anticlockwise direction and set

the auxiliary handle 11 to the required position.

Then tighten the wing bolt 10 again in clockwise

direction.

Adjusting the Drilling Depth

(PSB 530 RA/PSB 650 RA) (see figure B–C)

With the extraction device mounted, the drilling

depth “X” can be adjusted.

Insert a drill bit into the drill chuck and clamp

the drill bit, see section “Changing the Tool”,

page 23. Rotate the collar for the depth stop 13

upward until it can be moved on the telescopic

guide 12. Place the machine, without switching

it on, firmly against the surface to be drilled until

the drill bit touches the surface.

Read the scale value of the telescopic guide 12

on the collar 13. Add this value to the requested

drilling depth X. Slide the collar 13 to the calcu-

lated scale value and then rotate the collar 13

downward to lock the determined clearance.

Adjusting the Drilling Depth

(PSB 600 RE/PSB 650 RE) (see figure D)

The required drilling depth X can be set with the

depth stop 22.

Press the button for the depth stop adjustment

23 and insert the depth stop into the auxiliary

handle 11.

The knurled surface of the depth stop 22 must

face downward.

Pull out the depth stop until the distance be-

tween the tip of the drill bit and the tip of the

depth stop correspond with the desired drilling

depth X.

OBJ_BUCH-379-003.book Page 22 Monday, October 5, 2009 9:57 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSB 530RA in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSB 530RA Manual

Product: