Manual Bosch PSB 1000 RPE (page 19 of 117) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78159

Zoom out

Zoom in

1/117

English | 19

Bosch Power Tools 1 609 929 N03 | (10.10.07)

Assembly

f Before any work on the machine itself, pull

the mains plug.

Auxiliary Handle

f Operate your machine only with the auxiliary

handle 10.

The auxiliary handle 10 can be set to any position

for a secure and low-fatigue working posture.

Turn the wing bolt for adjustment of the auxiliary

handle 9 in anticlockwise direction and set the

auxiliary handle 10 to the required position. Then

tighten the wing bolt 9 again in clockwise direc-

tion.

Adjusting the Drilling Depth

The required drilling depth X can be set with the

depth stop 11.

Press the button for the depth stop adjustment 8

and insert the depth stop into the auxiliary han-

dle 10.

Pull out the depth stop until the distance be-

tween the tip of the drill bit and the tip of the

depth stop correspond with the desired drilling

depth X.

The knurled surface of the depth stop 11 must

face upward.

Changing the Tool

Keyless Chuck (see figure A)

The drill spindle is locked when the On/Off

switch 6 is not pressed. This makes quick, con-

venient and easy changing of the tool in the drill

chuck possible.

Open the keyless chuck 1 by turning in rotation

direction n, until the tool can be inserted. Insert

the tool.

Firmly tighten the collar of the keyless chuck 1 by

hand in rotation direction o until the locking ac-

tion (“click”) is no longer heard. This automati-

cally locks the chuck.

The locking is released again to remove the tool

when the collar is turned in the opposite direc-

tion.

Key Type Drill Chuck (see figure B)

f Wear protective gloves when changing the

tool. The drill chuck can become very hot dur-

ing longer work periods.

Open the key type drill chuck 13 by turning until

the tool can be inserted. Insert the tool.

Insert the chuck key 12 into the corresponding

holes of the key type drill chuck 13 and clamp the

tool uniformly.

Screwdriver Tools

When working with screwdriver bits , a universal

bit holder should always be used. Use only

screwdriver bits that fit the screw head.

For driving screws, always position the “Drill-

ing/Impact Drilling” selector switch 2 to the

“Drilling” symbol.

Replacing the Drill Chuck

Removing the Drill Chuck (see figure C)

Clamp the short end of an Allen key 14 into the

keyless chuck 1.

Place the machine on a stable surface (e.g. a

workbench). Hold the machine firmly and loosen

the keyless chuck 1 by turning the Allen key 14 in

rotation direction n. Loosen a tight-seated key-

less chuck by giving the long end of the Allen key

14 a light blow. Remove the Allen key from the

keyless chuck and completely unscrew the key-

less chuck.

Mounting the Drill Chuck (see figure D)

The keyless chuck is mounted in reverse order.

The drill chuck must be tightened with a

tightening torque of approx. 20–25 Nm.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

OBJ_BUCH-530-001.book Page 19 Wednesday, October 10, 2007 10:49 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSB 1000 RPE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSB 1000 RPE Manual

Product: