Manual Bosch PSB 1000 RPE (page 20 of 117) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78159

Zoom out

Zoom in

1/117

1 609 929 N03 | (10.10.07) Bosch Power Tools

20 | English

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in con-

nection with wood-treatment additives (chro-

mate, wood preservative). Materials contain-

ing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your coun-

try for the materials to be worked.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V can

also be operated with 220 V.

Reversing the Rotational Direction

(see figures E–F)

The rotational direction switch 7 is used to re-

verse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 6 actuated.

Right Rotation: For drilling and driving in screws,

push the rotational direction switch 7 left to the

stop.

Left Rotation: For loosening and unscrewing

screws and nuts, press the rotational direction

switch 7 through to the right stop.

Setting the Operating Mode

Drilling and Screwdriving

Set the selector switch 2 to the “Drill-

ing” symbol.

Impact Drilling

Set the selector switch 2 to the “Impact

drilling” symbol.

The selector switch 2 engages noticeably and

can also be actuated with the machine running.

Switching On and Off

To start the machine, press the On/Off switch 6

and keep it depressed.

To lock the pressed On/Off switch 6, press the

lock-on button 5.

To switch off the machine, release the On/Off

switch 6 or when it is locked with the lock-on but-

ton 5, briefly press the On/Off switch 6 and then

release it.

Adjusting the Speed/Impact Frequency

The speed/impact rate of the switched on power

tool can be variably adjusted, depending on how

far the On/Off switch 6 is pressed.

Light pressure on the On/Off switch 6 results in

low speed/impact rate. Further pressure on the

switch increases the speed/impact rate.

Preselecting the Speed/Impact Frequency

(see figure G) (PSB 700 RE/PSB 700 RES)

With the thumbwheel for speed preselection 15,

the required speed/impact frequency can be

preselected even during operation.

The required speed/impact frequency depends

on the material and the working conditions, and

can be determined through practical testing.

Electronic Torque Limitation/Speed Preselec-

tion (Torque Control) (PSB 1000 RPE)

Drilling with speed preselection: Set

the selector switch 4 to the “Drilling”

symbol. The required speed can be

selected with the thumbwheel 3; it

can also be adjusted during opera-

tion.

Screwdriving with torque limitation:

Set the selector switch 4 to the

“Screwdriving” symbol. The effective

torque at the drill spindle can be var-

iable adjusted with the thumbwheel

3 during operation:

I=low torque, III=high torque.

The maximum speed is automatically adapted to

the adjusted torque.

OBJ_BUCH-530-001.book Page 20 Wednesday, October 10, 2007 10:49 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSB 1000 RPE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSB 1000 RPE Manual

Product: