Manual Bosch PLS 300 Set (page 17 of 130) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544019

Zoom out

Zoom in

1/130

English | 17

Bosch Power Tools 1 609 929 W68 | (21.6.11)

Working Advice

Cutting Tiles (see figures H1–H3)

– Insert the tile cutter 14 into the sawing slot of the guide rail

4 above stop 15.

The arrow on the tile cutter must face you.

– Pull the tile cutter 14 over the complete tile with uniform

pressure.

– Remove the tile cutter 14 from the guide rail 4.

– Turn the locking lever 10 of the guide rail leftward and fold

the guide rail 4 upward.

– Place the break-off cones 16 on a firm surface.

Place the tile on the break-off cones in such a manner that

the break-off cones are positioned below the cutting line

and at the edges of the tile.

For diagonal cuts, the break-off cones should be posi-

tioned below the cutting line and somewhat further toward

the inside.

– Apply both of your thumb balls at the same time to the out-

er sides of the tile until the tile breaks.

Practical Advice

For working instructions and practical advice on the PLS 300

saw station, log onto: www.bosch-do-it.com/pls300

For further questions, please refer to our customer hotline:

Great Britain

Tel: +44 (0844) 736 0107

Australia, New Zealand

Phone: +61 (01300) 307 044

Maintenance and Service

Maintenance and Cleaning

If the saw station should fail or become damaged despite the

care taken in manufacture and testing, repair should be car-

ried out by an authorised customer services agent for Bosch

power tools.

In all correspondence and spare parts orders, please always

include the 10-digit article number given on the type plate of

the saw station.

Cleaning

Remove dust and chips after each working procedure by

blowing out with compressed air or with a brush.

Warranty Condition

Through faulty usage, sawing into the guide rail 4 or bridge 8

can occur. No warranty claims whatsoever shall arise thereof,

as this does not affect the function of the saw station.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Our customer service representatives can answer your ques-

tions concerning possible applications and adjustment of

products and accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: +44 (0844) 736 0109

Fax: +44 (0844) 736 0146

E-Mail: boschservicecentre@bosch.com

Problem Cause Corrective Measure

Tile does not break along the

cutting line

Scoring line not continuous from front to

end

Apply more pressure (uniformly) when scoring the

tiles and score over the complete surface

Tile cutter 14 incorrectly inserted Insert tile cutter correctly (see figure H1)

Surface structure of tile uneven Apply more pressure (uniformly) when scoring and

increase the scoring (cutting) speed

Break-off cones incorrectly positioned

when breaking the tile

Position break-off cones below the cutting line and

at the edges of the tile (see figure H3)

For diagonal cuts, position the break-off cones

somewhat further toward the inside

Scoring line not continuous from front to

end

Increase scoring pressure when cutting the tiles

OBJ_BUCH-1219-002.book Page 17 Tuesday, June 21, 2011 2:15 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PLS 300 Set in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PLS 300 Set Manual

Product: