Manual Bosch PKS 66 (page 26 of 168) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

110155

Zoom out

Zoom in

1/168

26 | English

1 609 929 N30 | (4.2.08) Bosch Power Tools

Adjusting the Riving Knife

(see figure B–C)

f Before any work on the machine itself, pull

the mains plug.

f Always work with the riving knife, except

when carrying out plunge cuts. The riving

knife prevents jamming of the saw blade

while sawing.

Adjustment is carried out at minimal cutting

depth, see “Adjusting the Cutting Depth”,

page 27.

PKS 54/PKS 54 CE:

It is best to place the machine on the face side

of the motor housing.

Release the clamping lever 24, tilt the base plate

15 away from the saw and tighten the clamping

lever 24 again.

Loosen screw 26, adjust the riving knife 14 to

the measure shown in the figure and tighten

screw 26 with a tightening torque between

6–9 Nm.

PKS 66/PKS 66 CE:

It is best to place the machine on the face side

of the blade guard 17.

Loosen the clamping lever 24, pull the saw away

from the base plate 15 and then tighten the

clamping lever 24 again.

Loosen screw 26, adjust the riving knife 14 to

the measure shown in the figure and tighten

screw 26 with a tightening torque between

6–9 Nm.

Disassembly/Assembly of the Riving Knife

For disassembly of the riving knife 14, unscrew

the screw 26 and remove the riving knife 14.

For assembly, insert the riving knife 14 and

tighten it with the screw 26. Afterwards, check

the adjustment of the riving knife as described

previously.

Dust/Chip Extraction

f Before any work on the machine itself, pull

the mains plug.

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

External Dust Extraction

Mount the vacuum hose 31 (accessory) on to

the saw dust ejector 18. Connect the vacuum

hose 31 to a vacuum cleaner (accessory). An

overview for connecting to various vacuum

cleaners can be found at the end of this manual.

The machine can be plugged directly into the re-

ceptacle of a Bosch all-purpose vacuum cleaner

with remote starting control. The vacuum clean-

er starts automatically when the machine is

switched on.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially det-

rimental to health or carcinogenic, use a special

vacuum cleaner.

Integrated Dust Extraction with Dust Bag

For smaller jobs, a dust bag (accessory) can be

mounted. Insert the dust bag sleeve firmly into

the saw dust ejector 18. Empty the dust bag at

regular intervals to maintain optimum dust col-

lection.

OBJ_BUCH-662-001.book Page 26 Monday, February 4, 2008 11:14 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PKS 66 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PKS 66 Manual

Product: