119977
12
Zoom out
Zoom in
Previous page
1/88
Next page
English - 2
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
Wear protective glasses and hearing protec-
tion.
For long hair, wear hair protection. Work only
with closely fitting clothes.
The dust that is produced while working can be
detrimental to health, inflammable or explo-
sive. Suitable safety measures are required.
Examples: Some dusts are regarded as carci-
nogenic. Use suitable dust/chip extraction and
wear a dust respirator.
If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Always direct the cable to the rear away from
the machine.
Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Use only
extension cables that are approved for outdoor
use.
Hold the power tool only by the insulated
gripping surfaces, when performing an op-
eration where the cutting tool may run into
hidden wiring or its own cord.
Contact with a “live” wire will make exposed
metal parts of the tool “live” and shock the op-
erator.
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assist-
ance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
The machine must be operated only with the
appertaining protective devices.
The retracting blade guard 9 must be able to
move freely and close by itself; it must not be
clamped while opened.
Always use the riving knife 8.
For stationary use, the machine may be oper-
ated only on a sawing table with restarting pro-
tection.
Apply the machine to the workpiece only when
switched on.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
When working, always guide the machine
away from the body.
Do not work with materials containing asbes-
tos.
The cutting path must be free of obstacles both
above and below.
The saw blade must not protrude more
than 3 mm out of the workpiece.
Keep hands clear of the rotating saw blade. Do
not come into contact with the rotating saw
blade on the underside of the workpiece.
Do not allow fingers to enter the chip ejector 3.
Do not saw into nails, screws, etc.
Do not work overhead with the machine.
The saw blade and riving knife must not be-
come stuck in the cut. The saw teeth setting
must be wider and the main body of the saw
blade thinner than the thickness of the riving
knife.
Protect saw blades against shock and impact.
Do not wedge the saw blade.
If the saw blade jams, switch off the machine
immediately.
After switching off, do not slow down the saw
blade by exerting side pressure.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
Use only sharp, flawless saw blades. Change
cracked, bent or dull saw blades immediately.
Saw blades of high alloy, high-speed steel
must not be used.
Never allow children to use the machine.
Bosch is only able to ensure perfect operation
of the machine if the original accessories in-
tended for it are used.
For Your Safety
2 610 392 415 - Buch Seite 2 Dienstag, 10. Dezember 2002 7:52 07
12 • 2 610 392 415 • TMS • 28.11.02
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PKS 46 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PKS 46 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info