460549
21
Zoom out
Zoom in
Previous page
1/125
Next page
English | 21
Bosch Power Tools 2 609 004 770 | (12.11.10)
Rough Sanding
Attach a sanding sheet with coarse grain.
Apply only light pressure to the machine so that
it runs at a higher stroke rate and high material
removal is achieved.
Fine Sanding
Attach a sanding sheet with fine grain.
By lightly varying the application pressure or
changing the orbital stroke rate, the sanding
plate stroke rate can be reduced whereby the
orbital action is maintained.
With moderate pressure, move the machine in a
circular pattern or alternately in lengthwise and
crosswise directions over the workpiece. Do not
tilt the machine to avoid sanding through the
workpiece (e.g. when sanding veneer).
After finishing the working procedure, switch
the power tool off.
Polishing
For the polishing of weathered paint or buffing
out scratches (e.g., acrylic glass), the machine
can be equipped with appropriate polishing ac-
cessories such as lamb’s wool bonnet, polishing
felt or sponge (accessories).
Select a low stroke rate (setting 12) for polish-
ing in order to avoid excessive heating of the
surface.
Apply the polish onto a somewhat smaller sur-
face than you intend to polish. Work the polish-
ing agent in with a suitable polishing tool apply-
ing it crosswise or with circular motion and
moderate pressure.
Do not allow the polishing agent to dry out on
the surface, otherwise the surface can become
damaged. Do not subject the surface to be pol-
ished to direct sunlight.
Clean the polishing accessories regularly to en-
sure good polishing results. Wash out polishing
accessories with a mild detergent and warm wa-
ter; do not use paint thinner.
Application Table
The data in the following table are recommended
values.
The most favourable combination for working is
best determined by practical testing.
Maintenance and Service
Maintenance and Cleaning
f Before any work on the machine itself, pull
the mains plug.
f For safe and proper working, always keep
the machine and ventilation slots clean.
If the replacement of the supply cord is neces-
sary, this has to be done by Bosch or an author-
ized Bosch service agent in order to avoid a safety
hazard.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Application
Grain Size
(course sanding/
fine sanding)
Oscillation Rate
Roughening varnish 180/240 2/3
Touching up varnish 120/240 4/5
Removing varnish 40/60 5
Softwood 40/240 5/6
Hardwood 60/240 5/6
Veneer 180/240 24
Aluminium 80/240 4/5
Steel 40/240 5
Derusting steel 40/120 6
Stainless steel 80/240 5
Masonry, stone 80/240 5/6
OBJ_BUCH-1336-001.book Page 21 Friday, November 12, 2010 10:16 AM
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PEX 400AE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PEX 400AE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info