Manual Bosch PEX 400AE (page 19 of 125) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460549

Zoom out

Zoom in

1/125

English | 19

Bosch Power Tools 2 609 004 770 | (12.11.10)

Replacing the Sanding Sheet

(see figures A–B)

To remove the sanding sheet 7, lift it from the

side and pull it off of the sanding plate 4.

When attaching a new sanding sheet, remove

any dust or debris from the sanding plate 4, e.g.,

with a brush.

The surface of the sanding plate 4 is fitted with

Velcro backing for quick and easy fastening of

sanding sheets with Velcro adhesion.

Press the sanding sheet 7 firmly against the bot-

tom side of the sanding plate 4.

To ensure optimum dust extraction, pay atten-

tion that the punched holes in the sanding sheet

match with the holes in the sanding plate.

The alignment aid 8 can be used for alignment of

the sanding sheet 7 on the sanding plate 4.

Place the sanding sheet with the Velcro facing

upward on the alignment aid. Press the cams of

the alignment aid into two holes of the sanding

plate and roll off the sanding sheet from the

alignment aid. Press the sanding sheet firmly

against the sanding plate.

Selection of the Sanding Plate

Depending on the application, the machine can

be equipped with sanding plates of different

hardness:

– Sanding plate, medium (black): Suitable for

all sanding work; universally usable.

– Sanding plate, soft (grey, accessory): Suita-

ble for intermediate and fine sanding, incl. on

convex surfaces.

Replacing the Sanding Plate

(see figures C–D)

Note: Replace a damaged sanding plate 4 imme-

diately.

Pull off the sanding sheet or the polishing acces-

sory. Unscrew the four screws 9 completely and

remove the sanding plate 4.

Clean the upper side of the new sanding plate 4.

Apply a thin coat of synthetic grease to the outer

ring hatched grey in the figure.

Attach the new sanding plate 4 and tighten the

four screws again.

Note: A damaged sanding-plate base 10 may be

changed only by an authorised after-sales serv-

ice agent for Bosch power tools.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– As far as possible, use a dust extraction

system suitable for the material.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

f Prevent dust accumulation at the work-

place. Dusts can easily ignite.

Integrated Dust Extraction with Dust Box

(see figures E–H)

Attach the dust box 3 onto the extraction outlet

11 until it latches.

The filling level of the dust box 3 can easily be

checked through the transparent container.

To empty the dust box 3, pull it off toward the

bottom with a twisting motion.

Before opening the dust box 3, it is recommend-

ed to loosen the dust from the filter element by

gently striking it against a firm support (as

shown in the figure).

Hold the dust box 3 firmly, fold the filter element

12 upward and empty the dust box. Clean the thin

plates of the filter element 12 with a soft brush.

Note: To ensure optimum dust extraction, empty

the dust box 3 in good time and clean the filter

element 12 at regular intervals.

When working vertical surfaces, hold the power

tool in such a manner that the dust box 3 faces

downward.

OBJ_BUCH-1336-001.book Page 19 Friday, November 12, 2010 10:16 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PEX 400AE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PEX 400AE Manual

Product: