Manual Bosch PEX 220 (page 18 of 105) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78999

Zoom out

Zoom in

1/105

1 609 929 M15 | (5.11.07) Bosch Power Tools

18 | English

Replacing the Sanding Plate

(see figure B)

Note: Replace a damaged sanding plate 3

immediately.

Pull off the sanding sheet. Unscrew the four

screws 8 completely and remove the sanding

plate 3. Attach the new sanding plate 3 and

tighten the screws again.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in con-

nection with wood-treatment additives (chro-

mate, wood preservative). Materials contain-

ing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your coun-

try for the materials to be worked.

Integrated Dust Extraction with Dust Box

(see Fig. A1

– A4)

Attach the dust box 2 onto the extraction outlet

5 until it latches.

To empty the dust box 2, press the latching

levers 6 on the side of the dust box (n). Pull off

the dust box toward the bottom (o).

Before opening the dust box 2, it is recommend-

ed to loosen the dust from the filter element by

gently striking it against a firm support (as shown

in the figure).

Grasp the dust box 2 by the recessed grip, fold

the filter element 7 upward and empty the dust

box. Clean the thin plates of the filter element 7

with a soft brush.

Note: To ensure optimum dust extraction, empty

the dust box 2 in good time and clean the filter

element 7 at regular intervals.

When working vertical surfaces, hold the power

tool in such a manner that the dust box 2 faces

downward.

External Dust Extraction (see figure C)

Slide the extraction adapter 9 onto the outlet

piece 5. Ensure that the latching levers of the

extraction adapter engage. The extraction

adapter 9 accepts a vacuum hose with a diameter

of 19 mm.

The vacuum cleaner must be suitable for the

material being worked.

An overview for connecting to different vacuum

cleaners can be found at the end of these oper-

ating instructions.

When vacuuming dry dust that is especially detri-

mental to health or carcinogenic, use a special

vacuum cleaner.

When working vertical surfaces, hold the power

tool in such a manner that the vacuum hose faces

downward.

For removal of the extraction adapter 9, press

the latching levers together at the rear and pull

the extraction adapter off.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V can

also be operated with 220 V.

Switching On and Off

To start the machine, tilt the On/Off switch 1 to

position “1”.

To switch off the machine, tilt the On/Off switch

1 to position “0”.

OBJ_BUCH-500-001.book Page 18 Monday, November 5, 2007 8:33 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PEX 220 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PEX 220 Manual

Product: