Manual Bosch Performance Line - Intuvia 2015 (page 32 of 219) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

780250

Zoom out

Zoom in

1/219

English–6

0 276 001 SPI | (3.6.15) Bosch eBike Systems

Speed and Distance Indication

The speed indication f always displays the current speed.

The following functions are available in the function indica-

tion (combination of text indication d and value indication e):

–“Clock”: Current time

–“Max. speed”: Maximum speed achieved since the last

reset

–“Avg. speed”: Average speed achieved since the last reset

–“Trip time”: Trip time since the last reset

–“Range”: Estimated range of the available battery-pack

charge (for constant conditions such as assistance level,

route profile, etc.)

–“Odometer”: Display of the total distance travelled with

the eBike (cannot be reset)

–“NuVinci Cadence/Gear”: This menu item is displayed

only in conjunction with a Nu Vinci H|Sync automatic trans-

mission.

If you press the “i” button for longer than 1 s, you will ac-

cess the NuVinci menu item from any menu item in the in-

formation menu.

To switch from the “NuVinci Cadence” mode to the

“NuVinci Gear” mode, press the “i” button for 1 s.

To switch from the “NuVinci Gear” mode to the

“NuVinci Cadence” mode, all you have to do is briefly

press the “i” button.

The default setting is “NuVinci Cadence”.

–“Gear”: This menu item appears only in conjunction with a

Shimano Di2 gear hub. The currently engaged gear of the

transmission is shown on the display. The newly engaged

gear will be shown briefly on the display whenever the gear

is shifted.

–“Gear: Auto”: This menu item appears only in conjunc-

tion with an SRAM automatic transmission.

By pressing the “i” button for more than 1 s, you can

switch back and forth between the “Gear: Auto” auto-

matic mode and the “Gear” manual mode.

If you are in first gear in manual mode, you can also press

the “–” 12 button to go to the “Gear: Auto” mode. By

pressing the “–” 12 button again, you can switch back to

the manual mode. It is also possible to access the manual

mode by pressing the “+” 13 button.

–“Trip distance”: Distance covered since the last reset

To switch between display functions, press button “i” 1 on

the on-board computer or button “i” 11 on the operating unit

repeatedly until the required function is displayed.

To reset “Trip distance”, “Trip time” and “Avg. speed”,

switch to any of the three functions and then press and hold

the “RESET” button 6 until the indication is set to zero. This

also resets the values of the other two functions.

To reset the “Max. speed”, switch to this function and then

press and hold the “RESET” button 6 until the indication is set

to zero.

To reset “Range”, switch to this function and then press the

“RESET” 6 button until the display is reset to the value of the

factory setting.

If the on-board computer is removed from the holder 4, all val-

ues of the features are saved and can still be displayed.

Displaying/Adapting Basic Settings

The basic settings can be displayed and changed regardless

of whether the on-board computer is inserted in the holder 4

or not. Some settings are visible and changeable only when

the operating computer is inserted. Some menu items may be

missing depending on the equipment of your eBike.

To access the basic settings menu, press and hold the

“RESET” button 6 and the “i” button 1 until “Configuration”

is displayed in text indication d.

To switch between the basic settings, press button “i” 1 on

the on-board computer repeatedly until the required basic

setting is displayed. If the on-board computer is inserted in

the holder 4, you can also press button “i” 11 on the operat-

ing unit.

To change the basic settings, press the On/Off button 5 next

to indication “–” to reduce or scroll down, or the lighting but-

ton 2 next to indication “+” to increase or scroll up.

If the on-board computer is inserted in the holder 4, it is also

possible to change using buttons “–” 12 and “+” 13 on the

operating unit.

To exit the function and save a changed setting, press the

“RESET” button 6 for 3 s.

The following basic settings are available:

–“– Clock +”: The current time can be set here. Pressing

and holding the setting buttons fast-forwards the setting

speed.

–“– Wheel circum. +”: You can change this value pre-set by

the manufacturer by ± 5 %. This menu item is displayed

only when the on-board computer is in the holder.

–“– English +”: You can change the language of the text indi-

cations. You can choose between German, English, French,

Spanish, Italian, Portuguese, Swedish, Dutch and Danish.

–“– Unit km/mi +”: The speed and distance can be dis-

played either in kilometres or miles.

Range Odometer NuVinci Cadence

(1 s)

NuVinci Gear

Range Odometer Gear: Auto

(1 s)

Gear

(1 s)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Performance Line - Intuvia 2015 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 31.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Performance Line - Intuvia 2015 Manual

Product: