Manual Bosch Performance Line - Intuvia 2015 (page 30 of 219) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

780250

Zoom out

Zoom in

1/219

English–4

0 276 001 SPI | (3.6.15) Bosch eBike Systems

Options for switching off the eBike system:

– Press the On/Off button 5 of the on-board computer.

– Switch the eBike battery pack off by its On/Off button (see

battery pack operating instructions).

– Remove the on-board computer out of its holder.

If the eBike is not moved and no button is pressed on the on-

board computer for 10 minutes, the eBike system will shut

down automatically in order to save energy.

eShift (optional)

eShift is the integration of automatic gear shifting systems in-

to the eBike system. To support the rider in the best way pos-

sible, the function indications and the basic settings menu

have been adapted for the “eShift” function.

eShift with NuVinci H|Sync

The optimum gear for the respective speed is automatically

set according to a pre-defined desired cadence. In manual

mode you can choose between multiple gears.

In the “NuVinci Cadence” mode you can use the “–” or

“+” button on the operating unit to increase or decrease the

desired cadence. If you hold down the “–” or “+” button, the

cadence will increase or decrease in steps of five. The desired

cadence is shown on the display.

In the “NuVinci Gear” mode you can use the “–” or “+”

button on the operating unit to switch back and forth between

several defined transmission ratios. The engaged transmis-

sion ratio (gear) is shown on the display.

eShift with SRAM DD3 Pulse

The gear hub of the SRAM DD3 Pulse works on a speed-de-

pendent basis. Regardless of which gear is engaged on the de-

railleur gears, one of the three gears of the gear hub will auto-

matically be engaged “Gear: Auto”.

The engaged gear will be shown briefly on the display whenev-

er the gear of the gear hub is shifted.

If the eBike is brought to a standstill from a speed of more

than 10 km/h, the system can automatically switch back to a

set “Start gear”. The “Start gear” can be set in the basic set-

tings menu (see “Displaying/Adapting Basic Settings” on page

English–6).

In the “Gear” mode you can use the “–” or “+” button on

the operating unit to switch back and forth between several

defined transmission ratios. The engaged transmission ratio

(gear) is shown on the display.

In the “Gear” manual mode, the system can also automati-

cally switch back to a set “Start gear”.

The drive unit recognises the gear shift and briefly reduces

the motor assistance level as a result of it, which means the

gear can also be shifted at any time under load or on a hill.

eShift with Shimano Di2

For Shimano eShift you use the Shimano control lever to shift

gears.

The engaged gear will be shown briefly on the display whenev-

er the gear of the gear hub is shifted.

The drive unit recognises the gear shift and briefly reduces

the motor assistance level as a result of it, which means the

gear can also be shifted at any time under load or on a hill.

If the eBike is brought to a standstill from a speed of more

than 10 km/h, the system can automatically switch back to a

set “Start gear”. The “Start gear” can be set in the basic set-

tings menu (see “Displaying/Adapting Basic Settings” on page

English–6).

Displays and configurations of the on-board

computer

Energy supply of the on-board computer

If the on-board computer is in the holder 4, a sufficiently

charged battery pack is inserted in the eBike and the eBike

system is turned on, then the on-board computer is powered

by the battery pack of the eBike.

If the on-board computer is removed from the holder 4, the

energy is supplied via an internal battery pack. If the internal

battery pack is weak when the on-board computer is switched

on, “Attach to bike” will appear in text indication d for 3 s.

The on-board computer will then turn off again.

To charge the internal battery pack, put the on-board comput-

er back in the holder 4 (when a battery pack is inserted in the

eBike). Switch the eBike battery pack on by its On/Off button

(see battery pack operating instructions).

You can also charge the on-board computer via the USB port.

Open the protective cap 8. Connect the USB port 7 of the on-

board computer via a suitable USB cable to a standard USB

charger or the USB port of a computer (5 V charging voltage,

max. 500 mA charging current). “USB connected” will ap-

pear in text indication d of the on-board computer.

If you do not use your eBike for several weeks, remove

the on-board computer from its holder. Store the on-

board computer in a dry environment at room tempera-

ture. Regularly recharge the on-board computer’s battery

pack.

Switching on/shutting down the on-board computer

To switch on the on-board computer, briefly press the On/Off

button 5. The on-board computer can also be switched on

when it is not inserted in the holder (if the internal battery

pack is sufficiently charged).

To switch off the on-board computer, press the On/Off but-

ton 5.

If the on-board computer is not inserted in the holder, it auto-

matically switches off after 1 minute to save energy if no but-

ton is pressed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Performance Line - Intuvia 2015 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 31.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Performance Line - Intuvia 2015 Manual

Product: