32141
12
Zoom out
Zoom in
Previous page
1/81
Next page
14
EURO • Printed in Germany • BA 1 619 929 477 • PBH 300 E • GB • OSW 11/99
1 619 929 477 • TMS • 27.10.99
Operate the mode selector switch 6 only
when the machine is at a standstill.
Press the release button 5 on the mode selector
switch 6 and turn the switch to the desired posi-
tion.
Drilling
Hammer drilling
Chiselling position
(Vario-Lock)
Chiselling (rotation off)
Removal
Set the mode selector switch 6 temporarily to the
“Chiselling” position (drill spindle locked).
Turn the locking sleeve 2 firmly counter clockwise
to the stop and pull off the tool holder (Figure C).
Mounting
Place the tool holder on the drill spindle.
Turn the locking sleeve 2 counter clockwise (to
the left) and press back firmly at the same time
until the tool holder latches and locks itself. En-
sure that the tool holder is firmly seated.
With the quick clamping drill chuck (optional ex-
tra), tools with round shafts can be used.
The quick clamping drill chuck is not
suited for hammer drilling and chisel-
ling.
Mounting the Quick Clamping
Drill Chuck
Take off the SDS-plus tool holder. Mount the
quick clamping drill chuck with drill chuck
adapter 9 (optional extra) and the SDS-plus tool
holder.
Opening the Quick Clamping
Drill Chuck (Figure D)
Open/close the quick clamping drill chuck 9 by
turning anti-clockwise or clockwise, respectively.
Clamping the Tool
Insert the tool into the opened quick clamping drill
chuck 9. The tool is clamped in two latching
stages:
Turn the quick clamping drill chuck 9 clockwise
up to the first latching resistance until it is felt to
engage. Then turn the drill chuck clockwise with
force, a little further, until a distinct latching click is
heard.
Allow the mode selector switch 6 to latch in
the “Drilling” position.
Remove the Tool
Turn the quick clamping drill chuck 9 anti-clock-
wise (to the left) through both latching positions
until it is possible to remove the tool.
Removing the Quick Clamping
Drill Chuck
Take off the quick clamping drill chuck with drill
chuck adapter 9 and the SDS-plus tool holder.
Mode Selector Switch
Change the SDS-plus tool holder
Quick Clamping Drill Chuck
for Tools with Round Shafts
(optional extra)
PBH 300 E - Buch Seite 14 Montag, 8. November 1999 4:36 16
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PBH300E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PBH300E in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PBH300E

Bosch PBH300E User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 109 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info