32173
12
Zoom out
Zoom in
Previous page
1/70
Next page
14
Overload Clutch
If the drill bit becomes jammed or caught, the drive to
the drill spindle is interrupted.
Because of the forces that occur as a result, always
hold the machine with both hands and take a
secure stance. The machine should be used only
with an auxiliary handle.
Auxiliary Handle (Fig. )
For safety reasons, the machine should be
used only with the auxiliary handle 9.
By rotating the auxiliary handle 9 to a comfortable
position, a fatigue-free and therefore safe working
position can be achieved.
Loosen the winged screw 21 on the auxiliary
handle 9. Swing grip to new position. Retighten the
winged screw.
Depth Stop (Fig. )
Loosen the winged screw 22 on the auxiliary
handle 9. Adjust the drilling depth t on the depth
stop 7. Retighten the winged screw.
Dust Vacuuming / Vacuuming Attachment
Dust vacuuming prevents large amount of dirt from
collecting and dust from contaminating the breathing air.
The machine can be connected directly to the
receptacle of a Bosch all-purpose vacuum cleaner
with remote starting. The vacuum cleaner starts
automatically when the machine is switched on.
Mount the vacuuming attachment (optional accessory)
and connect the vacuum cleaner.
The vacuuming attachment is spring loaded up to the
preselected drilling depth. In this manner, the
vacuuming attachment head is always held close to
the surface.
Setting the Speed (Fig. )
By increasing or decreasing the pressure on the on/off
switch 14, the speed can be continuously controlled
during operation.
Advantages:
Slow starting of holes e. g., on smooth surfaces or
tiles.
No sliding off of the drill when stating the hole.
No splintering of the hole.
Speed Pre-Selection (Fig. )
With the speed regulator 13, the required highest
speed can be pre-set.
As a result of this limitation, the on/off switch can be
pressed only to the pre-set highest speed.
The speed must be selected according to the
operating mode, the material to be worked and the
diameter of the drill.
See Operating Modes for recommended values.
The operation of the gearbox for each application is
set with the mode selection switch 10:
For this purpose, press the unlocking button 11 and
set to the desired operating mode.
The operating mode selector switch may be
actuated only at a standstill.
Do not use tools without SDS-plus for hammer
drilling or chiselling!
The following table shows how the operating mode
selector switch 10, the right / left rotation
switch 12 as well as the speed regulator 13 are to
be set for the various operating modes (See fold-out
page for figures):
Chisel Adjustment (Vario-Lock)
The chiselling tool can be turned in the tool holder
(Vario-Lock) to an optimum, fatigue-free working
position.
Insert the tool. Press the unlocking button 11 and set
the mode selection switch 10 to Vario-Lock
(Fig. ).
Turn the tool holder to the desired position. Thirty six
positions are possible.
(Fig. – )
With sharpened insertion tools, one achieves good
working performance and long service life. Therefore,
sharpen the chisel regularly.
Sharpen the tool on a grinding wheel (e.g. alumina
oxide) with constant water supply.
Take care that the cutting edge does not show signs
of coloration since this affects the hardness of the tool.
Working Instructions (Fig. K-N)
K
L
M
N
Operating Modes (Fig. R-W)
Drilling/
Screw
Driving
Hammer
Drilling
Vario-Lock Chiselling
Operating Mode Type
Hammer drilling in
concrete or stone
Fig.
Drilling in steel or wood Fig.
Screw driving
Right rotation
Left rotation
Fig.
Fig.
Chiselling Fig.
Sharpening the Chiselling Tools
R
S
T
U
V
W
O Q
pbh220_bu_1609929B38_t.fm5 Seite 15 Montag, 19. April 1999 3:07 15
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PBH240RE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PBH240RE in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PBH240RE

Bosch PBH240RE User Manual - English - 74 pages

Bosch PBH240RE User Manual - English - 142 pages

Bosch PBH240RE User Manual - German - 74 pages

Bosch PBH240RE User Manual - German - 142 pages

Bosch PBH240RE User Manual - Dutch - 74 pages

Bosch PBH240RE User Manual - Dutch - 142 pages

Bosch PBH240RE User Manual - Dutch - 142 pages

Bosch PBH240RE User Manual - Danish - 74 pages

Bosch PBH240RE User Manual - Danish - 142 pages

Bosch PBH240RE User Manual - French - 74 pages

Bosch PBH240RE User Manual - French - 142 pages

Bosch PBH240RE User Manual - Italian - 74 pages

Bosch PBH240RE User Manual - Italian, Polish - 142 pages

Bosch PBH240RE User Manual - Portuguese - 74 pages

Bosch PBH240RE User Manual - Portuguese - 142 pages

Bosch PBH240RE User Manual - Swedish - 74 pages

Bosch PBH240RE User Manual - Swedish - 142 pages

Bosch PBH240RE User Manual - Turkish, Spanish - 74 pages

Bosch PBH240RE User Manual - Spanish - 142 pages

Bosch PBH240RE User Manual - Norwegian - 74 pages

Bosch PBH240RE User Manual - Norwegian - 142 pages

Bosch PBH240RE User Manual - Finnish - 74 pages

Bosch PBH240RE User Manual - Finnish - 142 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info