708152
17
Zoom out
Zoom in
Previous page
1/112
Next page
English | 17
Bosch Power Tools
1 609 92A 1LU | (23.5.18)
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745,
EN 50581:2012 according to the provisions of the directives
2011/65/EU, 2014/30/EU, 2006/42/EG.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Assembly
Before any work on the machine itself, pull the mains
plug.
Auxiliary Handle
Operate your machine only with the auxiliary handle 17.
Changing the position of the auxiliary handle
(see figure A)
The auxiliary handle 17 can be set to any position for a secure
and low-fatigue working posture.
Turn the wing bolt for adjustment of the auxiliary handle 16
in anticlockwise direction and set the auxiliary handle 17
to the required position. Then tighten the wing bolt 16
again in clockwise direction.
Adjusting the Drilling Depth (see figureB)
The required drilling depth
X
can be set with the depth stop
18
.
Press the button for the depth stop adjustment 15 and in-
sert the depth stop into the auxiliary handle 17.
The knurled surface of the depth stop 18 must face down-
ward.
Insert the SDS-plus drilling tool to the stop into the SDS-plus
tool holder
3
. Otherwise, the movability of the SDS-plus drill-
ing tool can lead to incorrect adjustment of the drilling depth.
Rotary Hammer PBH ... 2800 RE 2900 RE 2900 FRE 3000 FRE Set 3000-2 FRE
Article number
3 603 C93 0.. 3 603 C93 1.. 3 603 C93 1.. 3 603 C93 2.. 3 603 C94 2..
Speed control

Stop rotation

Right/left rotation

Quick change chuck
––
Delivery Scope
Keyless drill chuck

Rated power input
W 720 730 730 750 750
Impact frequency at rated speed
min
-1
4000 4000 4000 4000 4000
Impact energy per stroke according to
EPTA-Procedure 05/2009
J2.62.7 2.7 2.8 2.8
Rated speed
min
-1
1100 1100 1100 1100 1100
No-load speed
–1st gear
–2nd gear
min
-1
min
-1
0–1450
0–1450
01450
0–1450
0–1450
0–3000
Tool holder SDS-plus SDS-plus SDS-plus SDS-plus SDS-plus
Spindle collar diameter
mm 43 43 43 43 43
Drilling diameter, max.:
–Concrete
Brickwork (with core bit)
Steel
Wood
mm
mm
mm
mm
26
68
13
30
26
68
13
30
26
68
13
30
26
68
13
30
26
68
13
30
Weight according to EPTA-Procedure
01:2014
kg 3.0 3.0 3.0 3.0 3.3
Protection class
/ II / II / II / II / II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-318-007.book Page 17 Tuesday, November 10, 2015 5:05 PM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PBH 3000 FRE Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PBH 3000 FRE Set in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info