Manual Bosch MUZ9PP1 (page 9 of 78) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

765836

Zoom out

Zoom in

1/78

Use

W Risk of injury!

– Do not insert the mains plug until

all preparations for working with the

appliance are complete.

– For safety reasons always fit the

protective drive covers on the front and

rear drive.

– While working, do not reach in between

the rollers and do not insert any objects

between the rollers.

– Do not wear your hair loose or loose-

fitting garments.

Caution!

Never apply pressure to the attachments

when fitting or during use! The bevel gear

and base unit might become damaged.

Recommended speeds

5for sheets of dough

7for wide pasta strips

Not suitable for use with this

accessory!

Making sheets of dough

X Image sequence C

Important: Only prepare the base unit as

described in the main operating instructions.

1. Place the bevel gear on the main drive

with the locking lever open as shown.

Note: The bevel gear can also be fitted

rotated through 180° if you wish to work on

the left-hand side of the appliance.

2. Rotate the bevel gear in a clockwise

direction until it is securely fitted to the

main drive. Fully close the locking lever

to fix the bevel gear in position.

3. Position the pasta attachment for sheets

of dough on the drive of the bevel gear,

holding it at an angle.

4. Rotate the attachment in an

anticlockwise direction until it audibly

clicks into place.

Caution!

It should not be possible to turn the

attachment any further.

5. Pull the control knob out.

6. Rotate the control knob to dough

thickness 8 and let it click into place

again.

7. Plug the mains plug into the mains. Turn

the rotary switch to the recommended

setting.

8. Feed the dough into the attachment

from above, passing all pieces through

the rollers once.

Note: If the dough sticks to the rollers,

leave it to dry for approx. 15-30 minutes.

You can then continue processing the

dough.

9. Now reduce the thickness from position

8 step by step.

10. After each new setting pass the pieces

of dough through the rollers until the

required thickness is reached.

11. Once you have finished work, move the

rotary knob to y. Wait until the drive

comes to a standstill. Disconnect the

mains plug.

12. Hold down the release button and rotate

the attachment in a clockwise direction

until it disengages.

13. Remove the attachment.

Note: Possibly continue work using the

pasta attachment for tagliatelle. X “Making

pasta” see page 10

14. After finishing work:

Open the locking lever on the bevel

gear. Rotate the bevel gear in an

anticlockwise direction and remove.

Clean all parts directly after use.

X “Cleaning and maintenance” see

page 10

Please note:

– If you are making sheets for lasagne,

cut the dough into pieces of the required

size and either use immediately or allow

the pieces to dry.

– The sheets of dough can also be

processed further to make ravioli and

many other pasta dishes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUZ9PP1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch MUZ9PP1 Manual

Product: