698438
35
Zoom out
Zoom in
Previous page
1/196
Next page
35
en Using the scales
Do not slide the appliance about on
the work surface as this may impair the
functioning of the scales. To move the
appliance, lift it.
After switching on or resetting the
scales, they are calibrated for a brief
moment (tare). During this process, do
not touch the appliance or place any
items on top of it (e.g. wooden spoon,
tea towel etc.).
Ensure that measuring jugs or
packaging are not lying on top of the
appliance (e.g. on the edge of the
filling shaft).
Weighing ingredients
X Image sequence K
1. Prepare the base unit.
2. Plug the mains plug into the mains.
“OptiMUM” appears on the display.
3. Press button C and don’t touch the
appliance again.
Individual dashes appear one after each
other on the display during calibration:
“–––––” (tare).
4. “0g” or “0.00lb” appears on the display
(depending on the setting). The scales
are ready.
5. Add ingredients. The scales display the
weight.
6. Start processing or put out other
ingredients ready for use.
7. Press button C and do not touch
the appliance again. “0g” or “0.00lb”
appears on the display (depending on
the setting). The scales are ready.
8. Add all desired ingredients and weigh
them in this manner.
Process the weighed ingredients. X “Using
without additional functions” see page 31
Note: If button C is pressed while
processing food, “FOR SCALE
STOPMACHINE” appears on the display.
Pre-setting the weight
X Image sequence L
1. Press button C and don’t touch the
appliance again.
Individual dashes appear one after each
other on the display during calibration:
“–––––” (tare).
2. “0g” or “0lb” appears on the display
(depending on the setting). The scales
are ready.
3.
100g or 0.20lb appears on the
display (depending on the setting).
4. Set the required weight (50-3000 g /
0.10-6.00 lb) using the + or - button.
5. Add ingredients. The quantity still
missing is shown on the display, e.g.
“65g”.
6. From “40g”, a recurring acoustic signal
sounds. The lower the remaining
quantity, the faster the acoustic signal
sounds.
Note: Setting the acoustic signal
X “Settings” see page 30
7. At “0g” (meaning that the pre-set
quantity has been added), the acoustic
signal stops.
8. If the pre-set quantity has been
exceeded, the acoustic signal will sound
continuously.
Note: Setting the acoustic signal
X “Settings” see page 30
The additional weight is indicated
with a minus symbol. If the quantity is
exceeded by 25 g, “–25g” is displayed.
Either remove the excess quantity
added or hold down one of the function
buttons (D/A/C) until “OptiMUM”
appears on the display.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUM9Y43S00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUM9Y43S00 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info