697139

Bosch MUC11W12 Manual

27
Zoom out
Zoom in
Previous page
1/126
Next page
27
en
Changing presettings
my mode
Manual cooking with individual settings for
the preparation time and temperature.
■ Once the appliance has been switched
on, in function selection mode, button
B and the indicator [my mode] are per-
manently lit. Button G flashes. “00:00”
lights up in the display.
■ Press button F once. “00:00” flashes in
the display.
■ Keep pressing, or press and hold,
button F until the desired preparation
time is displayed.
■ Press button C once. “00c” flashes in the
display.
■ Keep pressing, or press and hold,
button C until the desired preparation
temperature is displayed.
■ Press button G to start or continue
the preparation programme with the
individual values.
■ The appliance heats up the pan until the
target temperature is reached.
■ Once the target temperature is reached,
the lines go out and the preparation time
is shown in the display. The preparation
process starts automatically.
Changing presettings
Depending on the programme, the pre-con-
figured values for temperature, time or start
time delay can be changed according to
your individual needs.
The values are set by pressing the applica-
ble button. The values will change faster if
the button is pressed and held down. Once
the maximum value of a setting has been
reached, the display will jump back to the
minimum value.
Setting a start time delay
Depending on the preparation program, the
time until the programme is started can be set.
■ Select the preparation programme.
■ Press button A. Button G flashes.
A pre-configured value flashes in the
display.
■ Pressing button A increases the time
displayed.
■ Press button G when the desired start
time delay is displayed.
■ The desired start time delay is shown
in the display. [timer] lights up in the
display.
■ The time until the start counts down.
The preparation process starts automat-
ically after this.
Please note:
■ The start time delay can be switched
off at any time by pressing button G.
The preparation programme then starts
immediately.
■ If a pre-configured time does not flash
in the display, a start time delay cannot
be set for the selected preparation
programme.
Setting the preparation
temperature
The temperature can be individually
changed either before or during preparation.
■ Before preparation:
In function selection mode, keep
pressing button D until the desired
preparation programme is selected.
■ Press button C once. The pre-configured
preparation temperature flashes in the
display.
■ During preparation:
Press and hold button C. The current
preparation temperature is briefly shown
on the display.
■ Change the values: Press button C
repeatedly, or press and hold it until
the desired preparation temperature is
reached.
■ Press button G to start or continue
the preparation programme with the
individual values.
Note: If button G is not pressed, the
preparation programme will continue with
the temperature that was previously set.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUC11W12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUC11W12 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info