778946
14
Zoom out
Zoom in
Previous page
1/120
Next page
14
en Operation
W Risk of electric shock!
Only immerse the blender foot into the food
as far as the marking Í or there will be
a risk of electric shock!
6. To start processing with the preselected
speed, press the On button Ã.
7. To start processing with the highest
speed, press the Turbo button Ã.
8. Process the food with the blender foot.
9. Release the button when the desired
consistency is reached. Wait until
the drive comes to a standstill.
Disconnect the mains plug.
10. Hold down both release buttons and
remove the blender foot.
11. Clean all parts immediately after use.
X “Care and daily cleaning” see
page 14
Notes:
To prevent splashing, fully immerse the
blender blade in the ingredients before
switching on the appliance.
With liquid foodstuffs, immerse the
blender foot and hold it at a slight angle
for better blending results and to prevent
the ingredients from sticking to the
bottom of the receptacle.
Care and daily cleaning
The appliance and the tools used must be
thoroughly cleaned after each use.
Caution!
Do not use any cleaning agents
containing alcohol or spirits.
Do not use any sharp, pointed or metal
objects.
Do not use abrasive cloths or cleaning
agents.
Do not wedge plastic parts in the
dishwasher as they could become
permanently deformed.
Please note:
To make it easier to clean the blender
foot, after use place it in a receptacle
containing clean water and briefly press
the Turbo button  several times.
Caution!
Never press the On button à and the
Turbo button  at the same time.
Release buttons
To remove the blender foot or other
accessories, press both release buttons
simultaneously.
Stainless steel blender foot
The blender foot is suitable for cutting
and mixing mayonnaise, sauces, blended
drinks, baby food, cooked fruit and cooked
vegetables, and for pureeing soups.
Accessories
If an accessory is not included with the
hand blender, it can be ordered from
customer service:
Accessories Order no.
Universal cutter L 12027759
Universal cutter XL 12027760
Whisk 12027761
“ProPuree” masher attachment 12027762
Operation
Caution!
The blender foot must be securely
connected to the base unit. The blender
foot must not wobble or fall off.
Solid foods such as apples, potatoes
and meat always must be cut up and
cooked until soft before processing. Use
the universal cutter for cutting/chopping
raw food (onions, garlic, herbs, etc.).
X Image sequence B
1. Place the prepared food in the blender
jug or another suitable receptacle or
process in the pan used for cooking.
2. Completely unwind the power cord.
3. Hold the base unit securely, fit the
blender foot onto the base unit and
press until it clicks into position.
4. Set the desired speed with the speed
control dial. Plug the mains plug into the
mains.
5. Hold the receptacle with one hand and
immerse the blender foot.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MS6CM4160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MS6CM4160 in the language / languages: All languages as an attachment in your email.

The manual is 3.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info