Manual Bosch MS 200 (page 25 of 192) (English, German, Dutch, French, Italian, Portuguese, Spanish)

697306

Zoom out

Zoom in

1/192

Product details | 25

6 720 815 257 (2014/10)MS 200

2.5 Scope of Delivery

Fig. 1, page 170:

[1] Module

[2] Cylinder temperature sensor (TS2)

[3] Collector temperature sensor (TS1)

[4] Bag with strain relief

[5] Installation instructions

2.6 Technical data

The design and operation of this product comply with

European Directives and the supplementary national

requirements. Its conformity is demonstrated by the CE

marking. You can ask for a copy of the declaration of conformity for this

product. For this see the contact address on the back cover of these

instructions.

2.7 Additional accessories

For precise information regarding suitable accessories, refer to your

local Bosch sales manager.

• For solar thermal system 1:

– Solar pump; connection to PS1

– Electronically controlled pump (PWM or 0-10 V); connection to

PS1 and OS1

– Temperature sensor (1st collector array); connection to TS1

(included in delivery)

– Temperature sensor at the bottom of cylinder 1; connection to

TS2 (included in delivery)

• Additionally for central heating backup (A) ( ):

– 3-way valve; connection to VS1/PS2/PS3

–

Temperature sensor at the middle of cylinder 1; connection to TS3

– Temperature sensor on the return; connection to TS4

• Additionally for cylinder 2/swimming pool with valve (B):

– 3-way valve; connection to VS2

–

Temperature sensor at the bottom of cylinder 2; connection to TS5

• Additionally for cylinder 2/swimming pool with pump (C):

– Solar pump 2; connection to PS4

–T

emperature sensor at the bottom of cylinder 2; connection to TS5

– 2nd electronically controlled pump (PWM or 0-10 V); connection

to OS2

• Additionally for central heating backup, cyl. 2 (D) ( ):

– 3-way valve; connection to VS1/PS2/PS3

–

Temperature sensor at the middle of cylinder 2; connection to TS3

– Temperature sensor on the return; connection to TS4

• Additionally for external heat exchanger at cylinder 1 or 2 (E, F or Q):

– Heat exchanger pump; connection to PS5

– Temperature sensor on heat exchanger; connection to TS6

• Additionally for 2nd collector array (G):

– solar pump 2; connection to PS4

– Temperature sensor (2nd collector array); connection to TS7

– 2nd electronically controlled pump (PWM or 0-10 V); connection

to OS2

• Additionally for return temperature control (H) ( ):

– Mixer; connection to VS1/PS2/PS3

–

Temperature sensor at the middle of cylinder 1; connection to TS3

– Temperature sensor on the return; connection to TS4

– Temperature sensor at the cylinder flow (downstream of mixer);

connection to TS8

• Additionally for transfer system (I):

– Cylinder transfer pump; connection to PS5

• Additionally for transfer system with heat exchanger (J):

– Cylinder transfer pump; connection to PS4

– Temperature sensor at the top of cylinder 1; connection to TS7

–

Temperature sensor at the bottom of cylinder 2; connection to TS8

– Temperature sensor at the top of cylinder 3; connection to TS6

(only if no heat appliance other than the solar system is installed)

• Additionally for thermal disinfection (K):

– Thermal disinfection pump; connection to PS5

Technical data

Dimensions (W×H×D) 246×184×61mm (further dimensions

 Fig. 2, page 170)

Maximum conductor cross-

section

• 230 V terminal

• Extra-low voltage terminal

•2.5mm

•1.5mm

Rated voltages

•BUS

• Module mains voltage

•User interface

• Pumps and mixers

• 15 V DC (reverse-polarity-protected)

• 230 V AC, 50 Hz

• 15 V DC (reverse-polarity-protected)

• 230 V AC, 50 Hz

Circuit breaker 230 V, 5 AT

BUS interface EMS 2/EMS plus

Power consumption on –

standby

<1W

Max. output

Max. output per connection

• PS1; PS4; PS5; VS1/PS2/PS3

•VS2

1100W

• 400 W (high-efficiency pumps

permissible; max. 40 A/s)

•10W

Cylinder temperature sensor

measuring range

• Lower fault limit

• Display range

• Upper fault limit

• < – 10 °C

• 0 ... 100 °C

•>125°C

Capturing range, collector

temperature sensor

• Lower fault limit

• Display range

• Upper fault limit

• < – 35 °C

• – 30 ... 200 °C

•>230°C

Permitted ambient temp. 0 ... 60 °C

IP rating IP44

IP rating I

ID no. Data plate ( Fig. 19, page 173)

Table 7

°C  °C  °C  °C 

20 14772 45 5523 70 2332 95 1093

25 12000 50 4608 75 1990 100 950

30 9786 55 3856 80 1704 – –

35 8047 60 3243 85 1464 – –

40 6653 65 2744 90 1262 – –

Table 8 Temperature sensor measurements (TS2 - TS6, TS8 - TS16)

°C  °C  °C  °C 

– 30 364900 25 20000 80 2492 150 364

– 20 198400 30 16090 90 1816 160 290

– 10 112400 35 12800 95 1500 170 233

0 66050 40 10610 100 1344 180 189

5 50000 50 7166 110 1009 190 155

10 40030 60 4943 120 768 200 127

15 32000 70 3478 130 592 - -

20 25030 75 2900 140 461 - -

Table 9 Measuring values, collector temperature sensor (TS1 / TS7)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MS 200 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 18,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch MS 200 Manual

Product: