697306

Bosch MS 200 Manual

22
Zoom out
Zoom in
Previous page
1/192
Next page
22 | Product details
MS 2006 720 815 257 (2014/10)
Cylinder 2 with valve (B)
2nd cylinder with priority/secondary control via 3-way valve ( Fig. 23, page 175)
• Selectable priority cylinder (cylinder 1 – top, 2nd cylinder – bottom)
• Cylinder charging only switches over to the low priority cylinder via the 3-way valve if the high priority
cylinder cannot be heated any further.
• While the low priority cylinder is being heated, the solar pump is switched off at adjustable test intervals for
the duration of the test in order to check whether the high priority cylinder can be heated up (change-over
check).
Cylinder 2 with pump (C)
2nd cylinder with priority/secondary control via 2nd pump ( Fig. 26, page 177)
Function as Cylinder 2 with valve (B), but the 2 solar pumps are used instead of the 3-way valve to switch
between the high priority and low priority cylinder.
The 2nd coll. array (G) function cannot be combined with this function.
Central heating backup cyl 2 (D) ()
Solar central heating backup with buffer or combi cylinder ( Fig. 24, page 176)
• Function similar to Central heating backup (A), but for the 2nd cylinder. If the cylinder temperature
exceeds the return temperature of the heating system by the set switch-on temperature differential, the
cylinder is integrated in the return via the 3-way valve.
Ext heat exchanger cyl 1 (E)
External heat exchanger for solar system at cylinder 1 ( Fig. 22, page 175)
• If the temperature at the heat exchanger exceeds the temperature at the bottom of cylinder 1 by the set
switch-on temperature differential, the cylinder primary pump is switched on. The frost protection function
for the heat exchanger is ensured.
Ext heat exchanger cyl 2 (F)
External heat exchanger for solar system at cylinder 2 ( Fig. 25, page 176)
• If the temperature at the heat exchanger exceeds the temperature at the bottom of cylinder 2 by the set
switch-on temperature differential, the cylinder primary pump is switched on. Frost protection for the heat
exchanger is ensured.
This function is only available if function B or C has been added.
2nd coll. array (G)
2nd collector array (e.g. east/west direction, Fig. 29, page 179)
Function of both collector arrays according to solar thermal system 1, but:
• If the temperature at the 1st collector array exceeds the temperature at the bottom of cylinder 1 by the set
switch-on temperature differential, the left solar pump is switched on.
• If the temperature at the 2nd collector array exceeds the temperature at the bottom of cylinder 1 by the set
switch-on temperature differential, the right solar pump is switched on.
Table 3
6 720 647 922-19.1O
6 720 647 922-20.1O
6 720 807 456-02.1O
6 720 647 922-22.1O
6 720 647 922-23.1O
6 720 647 922-24.1O
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MS 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MS 200 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 18,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info