700681
11
Zoom out
Zoom in
Previous page
1/110
Next page
11
en
Overview
Overview
X Fig. A
Base unit
1 Ejector button
2 On/Off switch (multi-level)
a 0 = Appliance switched off
b 1 = Lowest speed
c 4 = Highest speed
d M = Instantaneous switching
(highest speed)
3 “Spotlight” bowl illumination
4 Apertures for inserting the tools
a Large aperture (with 4 indentations)
b Small aperture
5 Power cord
Tools
6 Turbo stirring whisks (x2)
7 Kneading hooks (x2)
8 Universal cutter *
(separate instruction manual)
* depending on the model
With the universal cutter, you can use the
appliance at full power. If the universal
cutter is not included with the hand blender,
it can be ordered from customer service
(order no. 12011748).
Before using the appliance
for the first time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
Remove the base unit and all
accessories from the packaging.
Remove the packaging material that is
present.
Check all parts for completeness.
X Fig. A
Inspect all parts for visible damage.
Thoroughly clean and dry all parts
before using for the first time. X “Care
and daily cleaning” see page 12
Tools
Notes:
The stirring whisks are not suitable for
processing heavy dough.
The maximum processing quantity is
500 g of flour and ingredients.
Turbo stirring whisks
Suitable for sauces, beaten egg whites,
mashed potatoes, crème fraîche,
mayonnaise, cream and light dough, e.g.
cake mixture.
Kneading hook
Suitable for stiff mixtures such as
shortcrust pastry, yeast dough and
potato dough as well as for mixing heavy
mincemeat dough, pasta or bread dough.
Operation
W Risk of injury!
Do not insert the mains plug until all
preparations for working with the appliance
are complete and the tools are firmly
connected to the base unit. Never reach
into the rotating tools. Only use tools of the
same type in pairs.
X Fig. B
1. Completely unwind the mains cable.
2. Slide the desired tools into the
respective suitable apertures until you
hear them lock into place.
3. Place the ingredients into a suitable
receptacle.
4. Insert mains plug.
5. Immerse the stirring whisks or kneading
hooks into the mixture. Hold the bowl
firmly with one hand.
6. Switch on at the required speed level:
Level 1: For working and mixing
ingredients in
Level 4: For kneading and beating
M: For temporary maximum output,
press to the left and hold.
7. Move the mixer to and fro in the bowl
while mixing.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MFQ25200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MFQ25200 in the language / languages: All languages as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info