700756
16
Zoom out
Zoom in
Previous page
1/155
Next page
16
en Cleaning
4. Only use the pusher provided to push
the food further. The sorbet produced
will be collected in the container.
Reversing function
The reversing function is designed to
release food that has got stuck by briefly
running the worm gear in reverse.
Move the switch to O and wait for the
appliance to come to a stop.
Move the switch to { and keep it
pressed.
After approx. 3-5 seconds, release the
switch and wait for the appliance to
come to a stop.
Move the switch to ON and continue
with the juicing.
Note: If food that has got stuck is not
released by briefly putting the appliance into
reverse, switch the appliance off, unplug it
and clean it. X
Warning!
The reversing function must be used for
several seconds or it will no longer be pos-
sible to switch on the appliance.
After using the appliance
Empty both containers and then place
them under the apertures for juice and
fruit pulp again.
Close the sealing cap and slide the
adjusting lever for the fruit pulp all the
way to the right.
Pour a little water (approx. 150
the feed chute and move the switch
to ON.
After a short time, open the sealing cap
and slide the adjusting lever for fruit pulp
all the way to the left.
Let the appliance slow down and stop
completely before switching it off.
Move the switch to O and wait for the
appliance to come to a stop.
Disconnect the mains plug.
Clean all parts immediately after use.
Cleaning
The appliance and the individual parts used
must be thoroughly cleaned after each use.
W Risk of electric shock!
Unplug the appliance before cleaning it.
Never immerse the base unit in liquids
and do not clean in the dishwasher.
Do not steam-clean the appliance.
Caution!
Do not use any cleaning agents
containing alcohol or spirits.
Do not use any sharp, pointed or metal
objects.
Do not use abrasive cloths or cleaning
agents.
Do not clean the individual parts in the
dishwasher.
Notes:
When processing food such as carrots,
plastic parts may become discoloured.
This can be removed with a few drops of
cooking oil.
Completely open the seal for fruit pulp.
X “Adjusting lever / seal for fruit pulp”
see page 14
In Fig. H you will find a summary of how to
clean the individual parts.
Dismantling the appliance
Rotate the lid to the marking (,
remove.
Remove the assembled juice drum.
Then dismantle the juicer screw, strainer
or sorbet insert piece and the rotating
brush one by one.
Note: If the individual parts in the juice
drum are jammed (e.g. due to remnants of

X Image sequence I
1. Turn the juice drum over, putting a cloth
underneath.
2. On the underside carefully press on the
drive shaft of the juicer screw until it
releases.
3. Remove all individual parts.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MESM731M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MESM731M in the language / languages: All languages as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info