700756
15
Zoom out
Zoom in
Previous page
1/155
Next page
15
en
Use
Preparing food
Important: Only process ripe fruit and
vegetables. Unripe or over-ripe fruit will very
quickly clog the juicer screw and its strainer.
Remove stones or seeds (e.g. for

Remove hard peel/skin (e.g. for melons,

Fruits and vegetables with thin peel/skin
(e.g. apples, pears, carrots, radishes,
salad, cabbages, parsley, spinach,

need to be washed.
Peel citrus fruits and remove the white
pith, as the juice may taste bitter
otherwise.
Chop up large fruits and vegetables
beforehand so they fit into the feed
chute without having to force them in.
Use
W Risk of injury
Only operate the appliance in its fully
assembled state.
Never operate it without a correctly
placed and locked lid.
Do not reach into the feed chute with your
fingers. Use the supplied pusher only!
Caution!
Always use the sorbet insert piece to process
frozen fruits. Do not process fruit that gets

Important: If the juice reaches the 350 ml
marking, finish processing and empty the
juice drum.
Squeezing juice
X Image sequence D
Prepare the appliance as described.
X “Preparing to squeeze juice” see
page 14
1. Place one container under each of the
apertures for juice and fruit pulp.
2. Open the sealing cap for the juice.
3. Slide the adjusting lever for fruit pulp

either towards the centre (É
way to the right (Ê
4. Plug the mains plug into the mains.
Move the switch to ON. The appliance
starts. The LED ring lights up (depend-

rotates.
5. Add the prepared food to the feed chute.
6. Only use the pusher provided to push
the food further. The juice flows into the
right-hand container. The squeezed fruit
pulp will be collected in the left-hand
container.
7. Once the processing is complete or the
juice container is full, move the switch
to O and wait for the appliance to come
to a stop.
8. Close the sealing cap for the juice and
empty the container.
Notes:
To improve the amount of juice pro-
duced, preferably process ingredients
containing lots of juice at the beginning
and end of processing (e.g. oranges,

hard or fibrous Ingredients in-between.
Fill the food into the feed chute one
portion at a time.
Stuffing it in excessively does not
accelerate the processing and leads to
the drum overflowing.
Making sorbet
X Image sequence E
1. Prepare the appliance as described with
the sorbet insert piece. X “Preparing to
make sorbet” see page 14
Place a container under the aperture for
the juice. Open the sealing cap for the
juice.
2. Plug the mains plug into the mains.
Move the switch to ON. The appliance
starts. The LED ring lights up (depend-

3. Add the frozen food to the feed chute.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MESM731M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MESM731M in the language / languages: All languages as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info