746511

Bosch MCM3PM386 - MultiTalent 3 Plus Manual

26
Zoom out
Zoom in
Previous page
1/204
Next page
26
en Cleaning and servicing
Note: The longer the appliance remains
switched on, the finer the ingredients are cut.
Recommendations on using the accessories
can be found in the section “Recipes/
Ingredients/Processing”.
After using the appliance
Set the rotary switch to P.
Remove mains plug.
Rotate universal cutter anti-clockwise and
remove.
Turn universal cutter over (blade insert
face up).
Loosen blade insert clockwise (l) and
remove from the universal cutter jug.
Empty jug.
Clean all parts, see “Cleaning and
servicing”.
Cleaning and servicing
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
An overview of cleaning the individual parts
can be found in Fig. G.
W Risk of electric shock
Never immerse the base unit in water or
place under running water.
Warning!
Surfaces may be damaged. Do not use
abrasive cleaning agents.
Note: If processing e.g. carrots and red
cabbage, the plastic parts will become
discoloured by a red film which can be
removed with a few drops of cooking oil.
Cleaning the base unit
Remove mains plug.
Wipe the base unit with a damp cloth.
If required, use a little detergent.
Then dry the base unit.
Cleaning the bowl and
accessories
W Risk of injury from sharp blades!
Do not touch blades of the universal blade
with bare hands. When not in use, always
store the universal blade in the blade guard.
Clean them with a brush. Do not grip the
sharp blades or edges of the cutting discs.
Grip the discs by the plastic part in the centre
only!
All parts are dishwasher-proof. Do not
wedge plastic parts in the dishwasher as
they could warp.
Cleaning the blender /
universal cutter
W Risk of injury from sharp blades!
Do not touch blades of the blade insert with
bare hands. Clean them with a brush.
The blender jug (without blade insert), lid
and funnel are dishwasher-proof.
Do not clean the blade insert in the dish-
washer, but under running water (do not
soak in water). Remove seal for cleaning.
Troubleshooting
W Risk of injury!
Before rectifying a fault, pull out the
mains plug.
Fault:
Appliance does not start or appliance
switches off during operation.
Possible cause:
Bowl or lid or the accessory has not been
attached correctly or has become detached.
Remedial action:
Set the rotary switch to P.
Correctly attach bowl/lid or accessory and
screw on all the way.
Switch the appliance on again.
Important information
If the fault cannot be eliminated, please
contact customer service (see customer
service addresses at the end of this booklet).
Storage
Fig. H
The tools can be stored in the bowl to save
space.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MCM3PM386 - MultiTalent 3 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MCM3PM386 - MultiTalent 3 Plus in the language / languages: All languages as an attachment in your email.

The manual is 6,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info