774961
8
Zoom out
Zoom in
Previous page
1/65
Next page
8
en Cutting discs
Add liquids through the pusher.
The pusher insert can be used as a
measuring jug.
9. After processing, set the rotary switch to
P. Disconnect the mains plug.
Emptying the bowl
10. Rotate the lid anti-clockwise and
remove.
11. Take the tool holder with the universal
blade or kneading hook out of the bowl.
Remove the tool from the tool holder.
12. Rotate the bowl anti-clockwise and
remove. Empty the bowl.
Clean all parts immediately after use.
X “Cleaning and maintenance” see
page 11
Stirring whisk
For cream, egg white and light
dough (e.g. sponge mixture). Not
suitable for solid ingredients.
X Fig. E
1. Attach the bowl. Observe the
marking (.) when doing so. Rotate the
bowl clockwise as far as possible.
2. Place the drive shaft on the drive.
3. Insert the stirring whisk in the drive
housing until it locks into position.
4. Attach the drive housing to the drive
shaft, rotating slightly.
5. Add ingredients.
6. Attach the lid with the pusher. Observe
the marking (.) when doing so.
7. Rotate the lid clockwise as far as
possible.
8. Insert the mains plug. Set the rotary
switch to the desired setting.
After processing, set the rotary switch to
P. Disconnect the mains plug.
Clean all parts immediately after use.
X “Cleaning and maintenance” see
page 11
Kneading hook (metal)
For kneading heavy dough and
mixing in ingredients which are not
to be cut up (e.g. raisins, chocolate chips).
X Fig. F
1. Place drive shaft 2 on the drive.
Caution!
Always use drive shaft 2 with the metal
kneading hook.
2. Attach the bowl. Observe the
marking (.) when doing so. Rotate the
bowl clockwise as far as possible.
3. Place the metal kneading hook on the
drive shaft and press firmly.
4. Add ingredients.
5. Attach the lid with the pusher. Observe
the marking (.) when doing so.
6. Rotate the lid clockwise as far as
possible.
7. Insert the mains plug. Set the rotary
switch to the desired setting.
X “Adding more ingredients” see
page 7
After processing, set the rotary switch to
P. Disconnect the mains plug.
Clean all parts immediately after use.
X “Cleaning and maintenance” see
page 11
Cutting discs
W Risk of injury!
Do not grasp the sharp blades or edges of
the cutting discs. Take hold of the discs by
the edge only. Do not reach into the filling
opening. Always use the pusher for adding
ingredients.
Reversible slicing disc –
thick / thin
For slicing fruit and vegetables.
Marking on the reversible slicing disc:
“1” for the thick cutting side
“3” for the thin cutting side
Caution!
The reversible slicing disc is not suitable
for slicing hard cheese, bread, rolls or
chocolate. Only slice boiled waxy potatoes
when they are cold.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MC812S734G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MC812S734G in the language / languages: English as an attachment in your email.

The manual is 4.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info