Manual Bosch LR 60 (page 21 of 253) (All languages)

786509

Zoom out

Zoom in

1/253

English | 21

Marking

You can mark the position of the laser beam at the centre

mark(9) on the left and right of the laser receiver when the

beam hits the centre of the reception area(1).

When marking, take care to align the laser receiver so that it

is exactly vertical (with a horizontal laser beam) or horizontal

(with a vertical laser beam), as otherwise the marks are off-

set with respect to the laser beam.

Attaching using the holder (seefigureE)

You can use the holder(23) to attach the laser receiver to a

measuring rod(25) (accessory) as well as to other auxiliary

tools with a width of up to 65mm.

Screw the holder(23) to the mount(11) on the rear side of

the laser receiver with the fastening screw(26).

Loosen the rotary knob(24) on the holder, slide the holder

onto the measuring rod(25) and retighten the rotary

knob(24).

You can use the spirit level(21) to ensure that the

holder(23) is horizontally aligned along with the laser re-

ceiver. If the laser receiver is mounted at an angle, it will give

incorrect measurements.

The centre line reference(22) on the holder is situated at

the same height as the centre marking(9) and can be used

for marking the laser beam.

Attaching using a magnet (see figure F)

If an attachment is not required to be especially secure, the

laser receiver can be attached to steel parts using the

magnets(10).

Rectifying errors

Text display (e) Problem Corrective measures

PNK Failed to establish Bluetooth® connec-

tion to the GRL600CHV or

GRL650CHVG rotary laser

Briefly press the on/off button on the rotary laser to close

the error message. Restart the process for establishing

the connection.

If it is not possible to establish a connection, please con-

tact a Bosch customer service agent.

ERR Calibration of the GRL600CHV or

GRL650CHVG rotary laser failed Read and observe the operating instructions for the

GRL600CHV or GRL650CHVG.

CenterFind mode or CenterLock mode

failed

Press any button to close the error message. Check the

position of the rotary laser and laser receiver before re-

starting the function.

LR65G:

ERR and CL in alterna-

tion CenterFind mode cannot be started be-

cause the rotary laser is already working

in CenterLock mode.

Select CenterFind mode on both laser receivers and re-

start the function.

ERR and CF in alterna-

tion CenterLock mode cannot be started

because the rotary laser is already

working in CenterFind mode.

Select CenterLock mode on both laser receivers and re-

start the function.

Assignment of Functions

Function possible with LR 60 and GRL 600 CHV Rotary laser with red laser beam

(600−800nm)

Battery charge indicator of the rotary laser ● –

Direction indicators for the position of the laser beam ● ●

Relative height indicator ● ●

CenterFind mode ● –

CenterLock mode – –

Function possible with LR 65G and GRL 650 CHVG Rotary laser with green laser beam

(500−570nm)

Battery charge indicator of the rotary laser ● –

Direction indicators for the position of the laser beam ● ●

Relative height indicator ● ●

CenterFind mode ● –

CenterLock mode ● –

Bosch Power Tools 1 609 92A 7M6 | (12.05.2022)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch LR 60 in the language / languages: All languages as an attachment in your email.

The manual is 11.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch LR 60 Manual

Product: