733044
19
Zoom out
Zoom in
Previous page
1/68
Next page
English6
1 270 020 XBI | (11.4.16) Bosch eBike Systems
“2. Bat. vx.x.x.x”: When using 2 battery packs this is the
software version of the other battery pack. This menu item
is displayed only when the on-board computer is in the
holder.
Gear vx.x.x.x”: This is the software version of the automat-
ic transmission. This menu item is displayed only when the
on-board computer is in the holder. This menu item is dis-
played only in conjunction with an automatic transmission.
Error Code Indication
The components of the eBike system are continuously and au-
tomatically monitored. When an error is detected, the respec-
tive error code is indicated in text indication d.
Press any button on the on-board computer 3 or on the oper-
ating unit 9 to return to the standard indication.
Depending on the type of error, the drive unit is automatically
shut off, if required. Continued travel without assistance from
the drive unit is possible at any time. However, have the eBike
checked before attempting new trips.
Have all repairs performed only by an authorised bike
dealer.
Code Cause Corrective Measure
410 One or more buttons of the on-board
computer are blocked.
Check if any buttons are blocked, e.g. from dirt or debris. Clean the but-
tons, if required.
414 Connection problem of the operating
unit
Have connections and contacts checked.
418 One or more buttons of the operating
unit are blocked.
Check if any buttons are blocked, e.g. from dirt or debris. Clean the but-
tons, if required.
419 Configuration error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
422 Connection problem of the drive unit Have connections and contacts checked.
423 Connection problem of the eBike
battery pack
Have connections and contacts checked.
424 Communication error among the
components
Have connections and contacts checked.
426 Internal time-out error Restart the system. If the problem persists, contact your Bosch eBike
dealer. In this error status, it is not possible to display or adjust the wheel
circumference in the basic settings menu.
430 Internal battery pack of the on-board
computer is empty.
Charge the on-board computer (in the holder or via the USB port).
431 Software version error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
440 Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
450 Internal software error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
460 Error at USB connection Remove the cable from the USB connection of the on-board computer.
If the problem persists, contact your Bosch eBike dealer.
490 Internal error of the on-board com-
puter
Have the on-board computer checked.
500 Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
502 Bike lighting error Check the light and the associated wiring. Restart the system. If the prob-
lem persists, contact your Bosch eBike dealer.
503 Error of the speed sensor Restart the system. If the problem persists, contact your Bosch eBike
dealer.
510 Internal sensor error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
511 Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
OBJ_BUCH-2795-001.book Page 6 Monday, April 11, 2016 4:27 PM
English7
Bosch eBike Systems 1 270 020 XBI | (11.4.16)
530 Battery pack error Switch off the eBike, remove the eBike battery pack and reinsert the
eBike battery pack. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
531 Configuration error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
540 Temperature error The eBike is outside of the permissible temperature range. Switch off the
eBike system and allow the drive unit to either cool down or heat up to the
permissible temperature. Restart the system. If the problem persists,
contact your Bosch eBike dealer.
550 An improper load was detected. Remove load. Restart the system. If the problem persists, contact your
Bosch eBike dealer.
580 Software version error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
591 Authentication error Switch off the eBike system. Remove the battery pack and reinsert it. Re-
start the system. If the problem persists, contact your Bosch eBike dealer.
592 Incompatible component Insert a compatible display. If the problem persists, contact your Bosch
eBike dealer.
593 Configuration error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
595, 596 Communication error Check the wiring to the transmission and restart the system. If the prob-
lem persists, contact your Bosch eBike dealer.
602 Internal battery pack error while
charging
Unplug the charger from the battery pack. Restart the eBike system. Plug
the charger into the battery pack. If the problem persists, contact your
Bosch eBike dealer.
602 Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
603 Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
605 Battery pack temperature error The eBike is outside of the permissible temperature range. Switch off the
eBike system and allow the drive unit to either cool down or heat up to the
permissible temperature. Restart the system. If the problem persists,
contact your Bosch eBike dealer.
605 Battery pack temperature error while
charging
Unplug the charger from the battery pack. Allow the battery pack to cool.
If the problem persists, contact your Bosch eBike dealer.
606 External battery pack error Check the wiring. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
610 Battery pack voltage error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
620 Charging error Replace the charger. Contact your Bosch eBike dealer.
640 Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
655 Multiple battery pack errors Switch off the eBike system. Remove the battery pack and reinsert it. Re-
start the system. If the problem persists, contact your Bosch eBike dealer.
656 Software version error Contact your Bosch eBike dealer so that he can perform a software update.
7xx Transmission error Please observe the operating instructions provided by the transmission
manufacturer.
No display Internal error of the on-board
computer
Restart your eBike system by switching it off and back on.
Code Cause Corrective Measure
OBJ_BUCH-2795-001.book Page 7 Monday, April 11, 2016 4:27 PM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Intuvia 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Intuvia 2017 in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 12,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info