Manual Bosch Indego 400 Connect (page 27 of 375) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

708274

Zoom out

Zoom in

1/375

English | 27

Bosch Power Tools F 016 L81 221 | (2.12.16)

It is recommended to mow your lawn with a conventional

mower before installation and before the first use every new

season (when clippings will be longer than 5 mm).

Note: The Indego’s cutting system is designed to cut small

lengths of grass (3–5 mm) so that the clippings can mulch

down and fertilise the lawn.

The height of cut for Indego can be adjusted to 30, 40 and

50 mm. Press the height of cut button once to move it to

40mm, twice to set it to 30 mm, and the height of cut reset

button ( ) to return to 50 mm (See figure 5).

Note: For the first few weeks of usage set the height of cut to

50 mm to prevent the perimeter wire being cut. Afterwards

the wire will be covered by the lawn.

Once mowing has started

–in the “Manual” mode, the machine operates until the

lawn area has been cut or until the manual stop button is

pressed. It only pauses mowing for charging.

– in the programmable “Calendar” mode or with the Bosch

auto calendar function, the machine operates continuous-

ly within a time slot. It only stops mowing for charging. To

stop mowing before the machine has finished a time slot,

press the manual stop button or send the mower home. If

the lawn area has been completed before the end of a time

slot the machine will return to the docking station.

Sensors

The machine has the following sensors:

– lift sensor, will be activated if the machine is lifted and

cause the machine and cutting blades to stop

– roll over sensor, will detect when the machine is inverted

and cause the machine and cutting blades to stop

– obstruction sensor, tactile detection for objects/obsta-

cles anywhere in the full width of the path of the machine

and cause the machine to change its direction

– tilt sensor, will be activated if the machine reaches an an-

gle of 32°

If one of the sensors is activated, such as lift sensor, the

screen will show a message, e. g. “Lift up”

Battery Charging

The battery is equipped with temperature monitoring that al-

lows charging only if the battery internal temperature is in the

range between 5 °C and 45 °C.

The battery is charged whenever the mower is in the docking

station.

The lithium-ion battery is supplied partially charged. To en-

sure full capacity of the battery, completely charge the ma-

chine in the docking station before first use.

The lithium-ion battery can be charged at any time without re-

ducing its service life. Interrupting the charging procedure

does not damage the battery.

When the battery is run down or discharged, the machine is

shut off by means of a protective circuit: the blade no longer

moves.

Menu Navigation

Following tables show the various menu items.

Settings Sub-menu 1 Sub-menu 2 Explanation

Mow now

Indego will start to mow in manual mode

It will send the mower to mow by pressing the confirm button

Calendar

Bosch Auto * Edit number of full

cuts a week

Edit day of a week

Bosch AUTO Calendar Function suited to your lawn size.

Within the AUTO Calendar Function it is possible to edit:

– number of full cuts a week (1 to 3) and

– days of the week (eg. to exclude sunday)

Schedule Edit (Current Day)

Don’t mow

Program a mowing schedule by setting individual mowing days and

slots (up to 2 per day).

It will delete all current slots for the selected day

Number of full cuts per week for the chosen days and times is dis-

played at the bottom

Off/Manual

Choose this option when no schedule should be used. Indego will

start to mow only by activating “Mow now” (or via the app for Con-

nect models).

* Only Indego 350/400 (available via the app for Connect models)

OBJ_BUCH-3008-002.book Page 27 Friday, December 2, 2016 12:09 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Indego 400 Connect in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 54,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Indego 400 Connect Manual

Product: