745983
30
Zoom out
Zoom in
Previous page
1/40
Next page
en Troubleshooting
30
Fault Cause and troubleshooting
lights up in the display and no
settings can be made on the ap-
pliance.
Childproof lock is activated.
Use the button to deactivate the childproof lock.
→"Childproof lock", Page18
flashes in the display and the
appliance will not start.
The cooking compartment is too hot for the selected operation.
1. Switch off the appliance and allow it to cool down.
2. Restart the operation.
appears in the display. The maximum cooking time has been reached. To prevent an unwanted per-
manent operation, the appliance automatically stops heating after several hours
if the settings are unchanged.
Switch off the appliance.
You can configure new settings if required.
Tip:To prevent the appliance from switching off when you do not want it to,
e.g. for an extremely long preparation time, set a cooking time.
→"Time-setting options", Page13
- appears in the display. There is too much water in the steam system. The water cannot be pumped
back into the water tank.
1. Empty the water tank and insert the empty water tank.
→"Emptying the water tank", Page12
2. Reset the time.
→"Setting the time on the clock", Page14
3. Switch the appliance off and on again.
4. Run "Descaling interrupted" in full.
→"Descaling interrupted", Page25
A message with appears in the
display, e.g. - .
Electronics fault
1. Press the button.
If required, reset the time.
aIf the fault was a one-off, the error message disappears.
2. If the error message appears again, call the after-sales service. Quote the ex-
act error message and the E no. of your appliance.
→"Customer Service", Page31
lights up permanently in the
display.
The water tank is empty.
Fill the water tank.
→"Filling the water tank", Page12
The water tank has not been put in fully.
Slide the water tank back in fully.
The water tank is leaking.
Order a new water tank.
The sensor is defective.
Call the after-sales service.
→"Customer Service", Page31
lights up in the display. Build-up of limescale in the appliance.
Run the descaling programme in full.
→"Descaling", Page24
appears in the display. The power supply has been disconnected or the appliance has been switched
off during the descaling process.
Run the interrupted descaling programme in full.
→"Descaling interrupted", Page25
During operation with steam as-
sistance, steam escapes from the
ventilation slots.
Steam escapes for physical reasons.
Wait until the cooking with steam assistance ends.
After the end of cooking with steam assistance, no more steam will escape
after a short time.
After using the steam assistance,
the cooking result is too dry or
too moist.
Steam intensity set incorrectly.
Set a higher or lower steam intensity.
HomeConnect is not working cor-
rectly.
Different causes are possible.
Go to www.home-connect.com.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch HRS538BS6B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch HRS538BS6B in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info