555443
55
Zoom out
Zoom in
Previous page
1/60
Next page
Heatronic 40007738003455 (2014/04) 55 of 60
E r ror Messages (2 of 3)
Error Message Description Troubleshooting Tips
BOILER (#) OUTLET SENSOR MAXIMUM EXCEEDED
The boiler outlet (#) temperature exceeded the Maximum Outlet
temperature. As a result, the control stops operation for the
associated boiler. The error message self clears once the error
condition is cleared.
BOILER (#) OUTLET TEMP
EXCEEDS MAX OUT SETTING
BOILER INLET SENSOR ERROR
OPEN or SHRT displays on the screen.
Due to an open or short circuit, the control failed to read the
boiler inlet sensor. The control operates normally while the error
message is present. The error message self clears once the
error condition is corrected.
CHECK BOILER INLET SENSOR,
CHECK BOILER INLET SENSOR
WIRING
PRIMARY PUMP P1 FLOW PROOF FAILURE
The primary pump P1 has failed. Once the primary pump 1 relay
closed, a primary pump flow proof was call not detected before
the flow proof delay time elapsed.
CHECK FLOW PROVING DEVICE,
CHECK FLOW PROVING DEVICE
WIRING
PRIMARY PUMP P2 FLOW PROOF FAILURE
The primary pump P2 has failed. Once the primary pump 2 relay
closed, a primary pump flow proof was call not detected before
the flow proof delay time elapsed.
CHECK FLOW PROVING DEVICE,
CHECK FLOW PROVING DEVICE
WIRING
PRIMARY PUMP P1 & P2 FLOW PROOF FAILURE
Both the primary pump P1 & P2 have failed.
CHECK FLOW PROVING DEVICE,
CHECK FLOW PROVING DEVICE
WIRING
PRIMARY PUMP FLOW PROOF ERROR
The primary pump has been turned off but the primary pump
flow proof remains detected after 4 minutes.
CHECK FLOW PROVING DEVICE,
CHECK FLOW PROVING DEVICE
WIRING
COMBUSTION AIR PROOF FAILURE
The combustion air damper has failed. The Comb Air (Aux) relay
closed, but the control did not detect a Comb Air Proof before
the C.A. proof delay time elapsed.
CHECK CA PROVING DEVICE,
CHECK CA PROVING DEVICE
WIRING
COMBUSTION AIR PROOF CALL ERROR
The combustion air damper has been turned off but the Comb
Air Proof remains detected after 4 minutes.
CHECK CA PROVING DEVICE,
CHECK CA PROVING DEVICE
WIRING
COMMON FLUE MAXIMUM EXCEEDED
The Common Flue Sensor temperature has exceeding the
FLUE MAX setting. As a result, the control stops operation for
the entire plant.
COMMON FLUE TEMP EXCEEDS
MAX SETTING
NO HEAT ALERT
The boiler supply temperature did not increase within the boiler
alert time. The control operates normally while this Alert is
present. To reset the Alert, press the ‘CLEAR’ button while
viewing this warning message.
NO CHANGE IN SUPPLY TEMP
WITHIN SPECIFIED PERIOD OF
TIME
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Heatronic 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Heatronic 4000 in the language / languages: English as an attachment in your email.

The manual is 7,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Heatronic 4000

Bosch Heatronic 4000 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info