555443
54
Zoom out
Zoom in
Previous page
1/60
Next page
Heatronic 4000 7738003455 (2014/04)54 of 60
Troubleshooting
It is recommended to complete all wiring to ensure trouble free operation. Should an error occur, simply follow these steps:
1. Find: If the Heatronic 4000 flashes on the screen, it is indicating a problem on the system.
2. Identify: Press & hold the Home button for 3 seconds to view the available menus. Tap the NEXT ITEM button to locate the
Toolbox Menu & press ENTER to view the toolbox menu items. The Error code should appear as the first item. The troubleshooting
tips will then marquee across the Item field.
3. Solve: Using the lookup chart below, match the Error code to the one on the control. Use the Description & Troubleshooting
Tips in the chart to solve the problem.
E r ror Messages (1 of 3)
Error Message Description Troubleshooting Tips
CONTROL SETUP FAILURE
The control failed to read the Setup menu settings, & reloaded
factory default settings. Operation stops until this error message
is cleared.
To clear, press the ‘CLEAR’ button while viewing this warning
message.
RESET DEFAULTS,
VERIFY ALL SETTINGS
PRIMARY SUPPLY SENSOR ERROR
OPEN or SHRT displays on the screen.
Due to an open or short circuit, the control failed to read the boiler
supply sensor. As a result, & if available, the control operates
using the primary return sensor. If the primary return sensor is
unavailable, operation stops. The error message self clears once
the error condition is corrected.
CHECK PRIMARY SUPPLY SENSOR,
CHECK PRIMARY SUPPLY SENSOR
WIRING
PRIMARY RETURN SENSOR ERROR
OPEN or SHRT displays on the screen.
Due to an open or short circuit, the control failed to read the
boiler return sensor. If the primary supply sensor is available,
the control will operate normally. If the primary supply sensor
is unavailable, the control can only operate to satisfy indirect
DHW if its located in the near boiler piping (i.e. IDHW Location
= Near). The error message self clears once the error condition
is corrected.
CHECK PRIMARY RETURN
SENSOR,
CHECK PRIMARY RETURN
SENSOR WIRING
DHW SENSOR ERROR
OPEN or SHRT displays on the screen.
Due to an open or short circuit, the control failed to read the
DHW sensor. As a result, the control stops operation for DHW
heating (indirect or direct DHW). The error message self clears
once the error condition is corrected.
CHECK DHW SENSOR,
CHECK DHW SENSOR WIRING
OUTDOOR SENSOR ERROR
OPEN or SHRT displays on the screen.
Due to an open or short circuit, the control failed to read the
outdoor sensor. As a result, the control assumes an outdoor
temperature of 32°F (0.0°C) & continues operation. The error
message self clears once the error condition is corrected.
CHECK OUTDOOR SENSOR,
CHECK OUTDOOR SENSOR
WIRING
FLUE SENSOR ERROR
OPEN or SHRT displays on the screen.
Due to an open or short circuit, the control failed to read the vent
sensor. If the Flue Maximum is set to a temperature, the control
stops operation. If the Flue Maximum is set to Off, the control
continues operation. The error message self clears once the
error condition is cleared.
CHECK FLUE SENSOR
CHECK FLUE SENSOR WIRING
BOILER (#) OUTLET SENSOR ERROR
OPEN or SHRT displays on the screen.
Due to an open or short circuit, the control failed to read the
boiler (#) outlet sensor. The error message self clears once the
error condition is cleared.
CHECK BOILER (#) OUTLET
SENSOR,
CHECK BOILER (#) OUTLET
SENSOR WIRING
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Heatronic 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Heatronic 4000 in the language / languages: English as an attachment in your email.

The manual is 7,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Heatronic 4000

Bosch Heatronic 4000 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info