12
Time-setting options
You can call up the time-setting options menu by pressing
the
0 button. The following functions are available:
If the oven is switched off:
■ Setting the timer
■ Setting the clock
If the oven is switched on:
■ Setting the cooking time
■ Setting a later end time
■ Setting the timer
Setting the time-setting options in brief
1. Press the 0 button to open the menu.
2. Use the
X or Y button to switch to another line and set the
time or cooking time with the rotary selector.
3. Press the
0 button to close the menu.
A detailed description of how to adjust each individual function
is provided below.
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Note: You can only set hours and minutes.
Example in the picture: top/bottom heating setting, 180 °C,
cooking time of 45 minutes
1. Press the
0 button.
The Time-setting options menu appears.
2. Turn the rotary selector to set the cooking time.
3. Press the
0 button.
The Time-setting options menu closes.
4. If the operation has not yet started, press the
n button. You
can see the cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the
0 button.
Cancelling the cooking time
Press the
0 button to open the menu. Set the cooking time
to 00:00:00 using the rotary selector. Press the
0 button to
close the menu.
Changing the cooking time
Press the
0 button to open the menu. Change the cooking
time using the rotary selector. Press the
0 button to close the
menu.
Setting a later end time
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
A later end time can be set for
■ all types of heating and all dishes from the recommended
settings
■ a variety of programmes
■ and for self-cleaning
Example: you put the dish in the cooking compartment at 9.30 .
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into
standby. Cooking starts at 12.00 and finishes at 12.45.
This function is also available for self-cleaning. You can shift the
time of the cleaning operation so it is carried out at night, which
means that the oven is available at all times during the day.
Setting a later end time
Precondition: The selected operation has not already begun
and a cooking time has been set. The time-setting options
menu
0 is open.
1. Switch to "End" using the
X button. The end time of the
operation is displayed in the second line.
2. Set a later end time by turning the rotary selector.
3. Press the
0 button to close the Time-setting options menu.
4. Confirm by pressing the
n button.
The setting is adopted. The oven is in
0... standby. The end
time is displayed in the status bar. When cooking starts, the
cooking time is shown counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the
0 button.
Correcting the end time
This is possible while the oven is in standby. Press the
0
button to open the menu. Press the
X button and correct the
End time using the rotary selector. Press the
0 button to close
the menu.
