11
4. Press the n button.
Operation starts.
Once the dish is ready, switch the oven off with the
% button
or select and apply a new operating mode.
Opening the oven door during cooking
Operation is suspended. When the door is closed again,
operation resumes.
Pausing operation
Press the
n button briefly. The oven is paused. The symboln
flashes. Press the
n button again, operation continues.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Cancelling operation
Press and hold the
n button until 3D hot air and 160 °C
appear. You can now change the settings.
Calling up information
Press the
° button briefly. The first item of information appears.
Check each further item of information using the
[ rotary
selector. You will find information on the heating temperature,
types of heating, shelf position and accessories.
Setting the cooking time
See section Time-setting options, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Recommended settings
If you choose a dish from the recommended settings, the ideal
setting values are already specified. You can choose from
many different categories. You will find recommended settings
for a large number of dishes – from cake, bread, poultry, fish,
meat and game through to bakes and pre-prepared products.
You can change the temperature and cooking time. The type of
heating is fixed.
You can access the various dishes by navigating through
several selection levels. Try it out and see the range of dishes
for yourself.
Selecting a dish
1. Press the
! button.
3D hot air, 160 °C are suggested in the display.
2. Turn the rotary selector anticlockwise to Recommended
settings.
The first food category appears.
3. Press the
X button to switch to the food category and select
the required category by turning the rotary selector.
Use the
X button to switch successively to the next level.
Turn the rotary selector to find the next selection.
The setting for the selected dish now appears. You can
change the temperature, but not the type of heating.
4. Press the
n button.
Operation starts. The cooking time is shown counting down in
the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
00:00:00. You can cancel the signal early by pressing the
0
button.
Changing the temperature or grill setting
Turn the rotary selector to change the temperature or grill
setting.
Changing the cooking time
Press the
0 button and turn the rotary selector to change the
cooking time. Press the
0 button.
Calling up information
Press the
° button and check the information using the rotary
selector.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Setting rapid heating
Rapid heating is not suitable for all types of heating.
Suitable types of heating
■ 3D hot air
■ Top/bottom heating
■ HydroBaking
■ Pizza setting
■ Intensive heat
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Setting rapid heating
Press the
c button to activate rapid heating. The c symbol
appears next to the temperature you have set. The temperature
indicator bars start filling in.
Once all the bars are filled, rapid heating is complete. You will
hear a short signal. The
c symbol goes out. Place your dish
in the cooking compartment.
Notes
■ Rapid heating is cancelled if you change the type of heating.
■ If a cooking time has been set, this runs independently of
rapid heating and counts down immediately when operation
is started.
■ You can use the ° button to check the current cooking
compartment temperature during rapid heating.
■ To ensure an even cooking result, do not place your dish in
the cooking compartment until rapid heating is complete.
Cancelling rapid heating
Press the
c button. The symbol goes out.