Manual Bosch HBG6764B6B (page 17 of 52) (English)

745969

Zoom out

Zoom in

1/52

en Time-setting options

3. Press the l Start/Stop button to start.

The time on the display shows how long the

operation has already been running.

The appliance begins to heat up.

When your dish is ready, switch off the appliance using

the ÿ On/Off button.

Note: You can also set the cooking time and an end

time for the operation on the appliance. ~ "Time-

setting options" on page 16

Changing

After starting the appliance, the temperature is

highlighted. When you move the rotary selector, the

temperature is changed and applied immediately.

To change the type of heating, first use the l Start/Stop

button to interrupt the operation and then touch the

"Type of heating" text field. The selection list is

displayed. Touch the required type of heating. The

corresponding default temperature appears on the

display.

Note: When you change the type of heating, the other

settings are also reset.

Rapid heating

With Rapid heating, you can shorten the heat-up time

for some heating types.

The heating types suitable for Rapid heating are:

■< 4D hot air

■% Top/bottom heating

To achieve an even cooking result, do not place your

food or accessories into the cooking compartment until

"Rapid heating" is complete.

Applying settings

Ensure you have selected a suitable type of heating and

set a temperature of at least 100 °C. Otherwise, rapid

heating cannot be activated.

1. Set the type of heating and temperature.

2. Touch the "Rapid heating" text field.

"On" is displayed in the text field. A confirmation

message appears on the display.

When rapid heating comes to an end, an audible signal

sounds and a message appears on the display. "Off" is

displayed in the text field. Place your dish in the

cooking compartment.

Note: The "Cooking time" time-setting option starts at

the same time as rapid heating. Therefore, only set a

cooking time when rapid heating has come to an end.

Cancelling

To cancel the rapid heating, touch the "Rapid heating"

text field again. "Off" is displayed in the text field.

OTime-setting options

Ti me- s et t i ng opt i ons

Your appliance has different time-setting options.

You can call up the cooking time and the end time after

setting an operation using the touch-screen displays.

The timer has a separate field t and can be adjusted at

any time.

An audible signal sounds after a cooking time or timed

period has elapsed. You can cancel the audible signal

early by touching a field or touch-screen display.

Note: You can change how long the audible signal

sounds for in the basic settings. ~ "Basic settings"

on page 20

Setting the cooking time

You can set the cooking time for your dish on the

appliance. This means that the cooking time is not

unintentionally exceeded and you do not need to

interrupt other work in order to end the operation.

Applying settings

Depending on which direction you turn the rotary

selector first, the cooking time starts at a particular

default value: Left = 10 minutes, right = 30 minutes.

The cooking time can be set in one-minute increments

up to one hour, and then in five-minute increments.

The maximum setting is 23 hours and 59 minutes.

Example in the picture: It is 10:00, cooking time of 45

minutes.

1. Set the operating mode, and temperature or level.

2. Before starting the operation, touch the "Cooking

time" text field.

The cooking time is highlighted white in the display.





a

&

&RRNWLPH

PV

(QG



Time-setting option Use

qCooking time After the set cooking time has elapsed, the

appliance ends the operation automatically.

rEnd Enter a cooking time and the required end

time. The appliance starts automatically so

that the operation ends at the required time.

tTimer The timer functions like an egg timer. It runs

independently of the operation and the other

time-setting options. After the set time has

elapsed, the appliance does not switch on or

off automatically.

Time-setting options en

3. Turn the rotary selector to set the cooking time.

The end time is calculated automatically.

4. Press the l Start/Stop button to start.

The cooking time counts down.

The appliance begins to heat up.

Once the cooking time has elapsed, an audible signal

sounds. The appliance stops heating. The cooking time

00 m 00 s is shown on the display.

You can reset the cooking time using the "Cooking

time" text field or you can press the l Start/Stop button

to continue the operation without a cooking time.

When your dish is ready, switch the appliance off using

the ÿ On/Off button.

Changing and cancelling

To change the cooking time, touch the "Cooking time"

text field. The cooking time is highlighted, and can be

changed using the rotary selector. The change is

adopted immediately.

If you want to cancel the cooking time, reset the

cooking time to zero. After the change has been

adopted, operating continues without a cooking time.

Setting the end time

You can delay the time that the cooking time ends. You

can, for example, put your dish in the cooking

compartment in the morning and set the cooking time

so that it is ready at lunch time.

Notes

■Ensure that food is not left in the cooking

compartment for too long as it may spoil.

■Do not adjust the end time once the operation has

started. The cooking result would no longer be

satisfactory.

Applying settings

The end of the cooking time can be delayed by a

maximum of 23 hours and 59 minutes.

Example in the picture: It is 10:00, the set cooking time

is 45 minutes and the dish should be ready at 12:00.

1. Set the operating mode, and temperature or level.

2. Set the cooking time.

3. Before starting the operation, touch the "End" text

field.

The projected end time is highlighted white in the

display.

4. Set a later end time using the rotary selector.

5. Press the l Start/Stop button to start.

The time at which the appliance will start is shown in

the display.

The appliance is in standby mode. When the appliance

starts, the cooking time counts down on the display.

Once the cooking time has elapsed, an audible signal

sounds. The appliance stops heating. The cooking time

00 m 00 s is shown on the display.

You can reset the cooking time using the "Cooking

time" text field or you can press the l Start/Stop button

to continue the operation without a cooking time.

When your dish is ready, switch the appliance off using

the ÿ On/Off button.

Changing and cancelling

After starting the appliance, the end time can no longer

be changed.

If you want to cancel the cooking time and end time,

interrupt the operation by pressing the l Start/Stop

button. You can continue the operation without a

cooking time or end time.

Setting the timer

The timer runs alongside other settings. You can set it

at any time, even if the appliance is switched off. It has

its own audible signal so that you can tell whether it is

the timer or a cooking time which has elapsed.







(QG

&RRNWLPH

&

7HPSHUDWXUH

+RWDLUHFR

7\SHRIKHDWLQJ

&RRNWLPH





a

&

&RRNWLPH

PV

(QG





PV

&RRNWLPH

(QG

&

7HPSHUDWXUH

+RWDLUHFR

7\SHRIKHDWLQJ

(QG



6WDUW

&RRNWLPH

PV

(QG



Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch HBG6764B6B in the language / languages: English as an attachment in your email.

The manual is 4,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch HBG6764B6B Manual

Product: