Manual Bosch GWX 9-115 (page 19 of 311) (All languages)

786301

Zoom out

Zoom in

1/311

English | 19

Angle grinder GWX 9-115 GWX 9-115 S GWX 9-125 S GWX 9-125

Power output W 450 450 450 450

Rated speed min-1 11,000 11,000 11,000 11,000

Speed adjustment range min-1 11,000 2800–11,000 2800–11,000 11,000

Max. grinding disc diameter mm 115 115 125 125

Speed preselection – ● ● –

Restart protection – ● ● –

Weight according to EPTA-Procedure 01:2014

– with low-vibration auxiliary

handle kg 2.1 2.1 2.1 2.1

– with standard auxiliary handle kg 2.0 2.0 2.0 2.0

Protection class / II / II / II / II

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

Noise emission values determined according to

EN60745-2-3.

Typically the A-weighted noise level of the power tool are: 93

dB(A); sound power level 104 dB(A). Uncertainty K = 3 dB.

Wear hearing protection!

Vibration total values ah (triax vector sum) and uncertainty K

determined according to EN60745-2-3:

Surface grinding (roughing):

ah=6.5m/s2, K=1.5m/s2,

Disc sanding:

ah=6.0m/s2, K=1.5m/s2.

The vibration level given in these instructions has been

measured in accordance with a standardised measuring pro-

cedure and may be used to compare power tools. It can also

be used for a preliminary estimation of exposure to vibra-

tion.

The stated vibration level applies to the main applications of

the power tool. However, if the power tool is used for differ-

ent applications, with different application tools or poorly

maintained, the vibration level may differ. This can signific-

antly increase the exposure to vibration over the total work-

ing period.

To estimate the exposure to vibration accurately, the times

when the tool is switched off or when it is running but not ac-

tually being used should also be taken into account. This can

significantly reduce the exposure to vibration over the total

working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping the hands warm,

and organising workflows correctly.

Fitting

Fitting Protective Equipment

uPull the plug out of the socket before carrying out any

work on the power tool.

Note: If the grinding disc breaks during operation or the

holding fixtures on the protective guard/power tool become

damaged, the power tool must be sent to the after-sales ser-

vice immediately; see the "After-Sales Service and Applica-

tion Service" section for addresses.

Protective guard for grinding

Place the protective guard

(7) onto the holder on the

power tool until the coding

cams of the protective guard

are aligned with the holder.

When doing so, press and

hold the unlocking lever (1).

Press the protective guard

(7) onto the spindle collar un-

til the shoulder of the pro-

tective guard is sitting on the

flange of the power tool and

rotate the protective guard

until it audibly clicks into

place.

Adjust the position of the protective guard (7) to meet the

requirements of the operation. To do this, push the unlock-

ing lever (1) upward and rotate the protective guard (7) into

the required position.

uAlways position the protective guard(7) such that the

two cams on the unlocking lever(1) engage in the

corresponding openings on the protective guard(7).

uAdjust the protective guard (7) such that sparking in

the direction of the operator is prevented.

uThe protective guard (7) must only be adjustable

while the unlocking lever (1) is actuated. Otherwise,

the power tool must not be used any more under any

circumstances and must be sent to the after-sales ser-

vice.

Note: The coding cams on the protective guard (7) ensure

that only a protective guard that is suitable for the power

tool can be fitted.

Bosch Power Tools 1 609 92A 6KC | (21.05.2021)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWX 9-115 in the language / languages: All languages as an attachment in your email.

The manual is 5.53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GWX 9-115 Manual

Product: