Manual Bosch gws 25 180 j sds (page 20 of 122) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

390503

Zoom out

Zoom in

1/122

English - 7

1 609 929 B76 • TMS • 30.11.00

Owners of the Bosch cut-

ting stand of the design in

figure A require the cap a

(optional extra set, order

no. 2 607 001 306).

Owners of the Bosch cut-

ting stand of the design in

figure B require the claw b

(optional extra set, order

no. 2 607 001 306).

The handle must be

locked in the position

shown in figure C (with the

On/Off switch pointing

downwards). In any other

position the handle and

the handle unlocking lever

can become damaged by

the grinding dust deposit.

Cutting Stone

■ The machine must be used only for dry cut-

ting/grinding.

It is best to work with

a diamond cutting

disc. To ensure

against tilting, the

cutting guide 23

with special protec-

tive vacuuming hood

must be used.

The machine must be operated only with dust ex-

traction. In addition, wear a dust mask.

The vacuum cleaner

must be approved for

the extraction of ma-

sonry dust.

Bosch provides suit-

able vacuum clean-

ers.

Switch on the ma-

chine and place the

front part of the cut-

ting guide on the

workpiece.

Slide the machine with moderate advancing that

is adapted to the material to be worked (figure).

For cutting especially hard material, e. g., con-

crete with high gravel content, the diamond cut-

ting disc can overheat and become damaged as

a result. This is indicated clearly by a ring of

sparks that rotates with the diamond cutting disc.

In this case, interrupt the cutting process and al-

low the diamond cutting disc to cool by running

frely at no-load speed for a short time.

Noticeable decreasing work progress and a rotat-

ing spark ring are indications of a diamond cutting

disc that has become dull. With brief cuts in an

abrasive material (e. g., chalky sand stone), it

can be sharpened again.

■ Before any work on the machine itself, pull

the mains plug.

The machine head

can be rotated with

respect to the ma-

chine housing in 90°

steps. In this man-

ner, the on/off switch

can be brought to an

advantageous han-

dling position for

special working situ-

ations, e. g., for cut-

ting work with the

cutting guide 23/

cut-off stand (op-

tional extra) or for

left-handed persons.

Unscrew completely the four screws.

Rotate the machine head carefully and without

removing from the housing to the new position.

Screw in the screws again and tighten.

Rotating the Machine Head

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gws 25 180 j sds in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gws 25 180 j sds Manual

Product: