Manual Bosch gws 25 180 j sds (page 18 of 122) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

390503

Zoom out

Zoom in

1/122

English - 5

1 609 929 B76 • TMS • 30.11.00

Instead of the clamp-

ing nut 11, the quick

clamping nut 12 (op-

tional extra) can be

used. Grinding tools

can be mounted with-

out using tools.

The quick clamping

nut 12 may be used

only for roughing

and cutting discs.

Use only a flawless,

undamaged quick

clamping nut 12.

When screwing on,

take care that the

side with printing

does not point to the

grinding disc. The ar-

row must point to the

index mark 27.

Lock the grinder spindle with the spindle locking

button 2. Tighten the quick clamping nut by force-

fully turning the grinding disc in the clockwise di-

rection.

A properly tightened undamaged, quick clamping

nut can be loosened by hand turning the knurled

ring in the counter-clockwise direction.

Never loosen a tight quick clamping nut with

pliers but use a two-hole spanner. Insert the

two-hole spanner as shown in the illustration.

All grinding tools described in these operating in-

structions can be used (roughing and cutting

discs of synthetic resin-bonded, fibre-reinforced

material).

The permissible speed [RPM] or the circumferen-

tial speed [m/s] of the grinding tools used must be

at least in accordance with the values given in the

table.

Therefore, always observe the permissible rota-

tional/circumferential speed on the label of the

grinding tool.

Quick Clamping Nut

(Optional Extra)

Approved Grinding Tools

max.

[mm] [mm]

Dbd[RPM] [m/s]

180

230

22.2

8 500

6 500

180

230

–

8 500

6 500

100 30 M 14 8 500 45

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gws 25 180 j sds in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gws 25 180 j sds Manual

Product: