592508

Bosch GWS 24-300 PLUS SDS Professional Manual

23
Zoom out
Zoom in
Previous page
1/337
Next page
English | 23
Bosch Power Tools 3 609 929 B90 | (12.11.09)
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 93 dB(A);
Sound power level 104 dB(A). Uncertainty
K=3dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting-off concrete: Vibration emission value
a
h
=8.0 m/s
2
, Uncertainty K=1.5 m/s
2
,
Cutting-off metal: Vibration emission value
a
h
=8.0 m/s
2
, Uncertainty K=1.5 m/s
2
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Cut-off Grinder GWS 24-300
Professional
GWS 24-300 J
Professional
Article number
3 601 C64 3.. 3 601 C64 8..
Rated power input
W24002400
Output power
W16701670
Rated speed
min
-1
5000 5000
Grinding disc diameter, max.
mm 300 300
Thread of grinder spindle
M 14 M 14
Thread length (max.) of grinder spindle
mm 32 32
Max. cutting depth with cutting guide
mm 100 100
Reduced starting current
– z
Weight according to EPTA-Procedure 01/2003
kg 10.3 10.3
Protection class
/II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
Only for power tools without reduced starting current: Starting cycles generate brief voltage drops. Interference with
other equipment/machines may occur in case of unfavourable mains system conditions. Malfunctions are not to be
expected for system impedances below 0.25 ohm.
OBJ_BUCH-280-003.book Page 23 Thursday, November 12, 2009 1:21 PM
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWS 24-300 PLUS SDS Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 24-300 PLUS SDS Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info