786317

Bosch GWS 17-125 TS Manual

29
Zoom out
Zoom in
Previous page
1/437
Next page
English | 29
used (see figures in the front part of the operating manual),
and tighten them with the two-pin spanner(see " Quick-
clamping nut ", page29).
uAfter fitting the abrasive tool, check that the abrasive
tool is fitted correctly and can turn freely before
switching on the power tool. Make sure that the abras-
ive tool does not brush against the protective guard or
other parts.
A plastic part (O-ring) is fitted around the cent-
ring collar in the mounting flange (12). If the
O-ring is missing or damaged, the mounting
flange (12) must be replaced before operation
can resume.
Quick-clamping nut
To change the abrasive tool easily without having to use any
additional tools, you can use the quick-clamping nut (20) in-
stead of the clamping nut (19).
uThe quick-clamping nut (20) may be used only for
grinding or cutting discs.
Only use quick-clamping nuts (20) that are in good work-
ing order and not damaged.
When screwing on, make sure that the printed side of the
quick-clamping nut (20) is not facing the grinding disc;
the arrow must be pointing towards the index mark (33).
(33)
Press the spindle lock but-
ton (2) to lock the grinding
spindle. To tighten the
quick-clamping nut, turn
the grinding disc firmly
clockwise.
If the quick-clamping nut
has been attached correctly
and is not damaged, you
can loosen it by hand by
turning the knurled ring an-
ticlockwise. If the quick-
clamping nut is stuck, do
not attempt to loosen it
with pliers – always use
the two-pin spanner. Posi-
tion the two‑pin spanner as
shown in the figure.
Approved abrasive tools
You can use all the abrasive tools mentioned in these operat-
ing instructions.
The permissible speed [min-1] or the circumferential speed
[m/s] of the abrasive tools used must at least match the val-
ues given in the table.
It is therefore important to observe the permissible rota-
tional/circumferential speed on the label of the abrasive
tool.
Max. [mm] [mm] [°]
D b s d α [min-1] [m/s]
125
150
7.2
7.2
–
–
22.2
22.2
–
–
11,500
9700
80
80
125
150
4.2
4.2
–
–
22.2
22.2
–
–
11,500
9700
80
80
125
150
–
–
–
–
–
–
–
–
11,500
9700
80
80
75 30 – M 14 – 11,500 80
125
125
150
150
24
19
24
19
–
–
–
–
M 14
22.2
M 14
22.2
–
–
–
–
11,500
11,500
9700
9700
80
80
80
80
125 – – M 14 – 11,500 80
82 – – M 14 – 11,500 80
α
s
125
150
6
6
10
10
22.2
22.2
>0
>0
11,500
9700
80
80
Rotating the machine head (seefigureE)
uPull the plug out of the socket before carrying out any
work on the power tool.
The machine head can be rotated in 90° increments. In this
way, the on/off switch can be brought into a more favourable
handling position for particular applications, e.g. for left-
handed tool users.
Completely unscrew the four screws(). Rotate the ma-
chine head carefully, without removing it from the hous-
ing, into the new position(). Screw in and retighten the
four screws().
Removing the Dust Filter (see figureF)
Slide off the dust filter(4) at the bottom of the power tool in
the direction of the arrow.
Do not hold the dust filter(4) by its sides and do not pull it
off.
Bosch Power Tools 1 609 92A 6A0 | (11.02.2022)
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWS 17-125 TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 17-125 TS in the language / languages: All languages as an attachment in your email.

The manual is 16.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info