786317
27
Zoom out
Zoom in
Previous page
1/437
Next page
English | 27
To restart the tool, set the On/Off switch (3) to the "off" po-
sition and then switch the power tool on again.
Speed preselection
(GWS 14-125 S / GWS 17-125 S / GWS 17-125 TS / GWS
17-125 S INOX / GWS 17-150 S)
You can select the required speed using the speed preselec-
tion thumbwheel (5), even during operation. The informa-
tion in the table below describes the recommended values.
Material Application Application tool Thumbwheel position
Metal Removing paint Sanding sheet 2–3
Metal Brushing, removing rust Cup brush, abrasive disc 3
Stainless steel Grinding Grinding disc/fibre disc 4–6
Metal Rough grinding Grinding disc 6
Metal Cutting Cutting disc 6
Stone Cutting Diamond cutting disc 6
uThe rated speed of the accessory must be at least
equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed
can break and fly apart.
Level
Speed preselec-
tion
GWS 14-125 S
GWS 17-125 S
[min-1]
GWS 17-125 S INOX
[min-1]
GWS 17-125 TS
GWS 17-150 S
[min-1]
1 2800 1900 2400
2 4500 3000 3800
3 6200 4100 5200
4 7900 5300 6600
5 9600 6400 8100
6 11,500 7800 9700
The values specified for speed levels are guide values.
Fitting
Fitting Protective Equipment
uPull the plug out of the socket before carrying out any
work on the power tool.
Note: If the grinding disc breaks during operation or the
holding fixtures on the protective guard/power tool become
damaged, the power tool must be sent to the after-sales ser-
vice immediately; see the "After-Sales Service and Applica-
tion Service" section for addresses.
Protective guard for grinding
Place the protective guard
(9) onto the holder on the
power tool until the coding
cams of the protective guard
are aligned with the holder.
When doing so, press and
hold the unlocking lever (1).
Press the protective guard
(9) onto the spindle collar un-
til the shoulder of the pro-
tective guard is sitting on the
flange of the power tool and
rotate the protective guard
until it audibly clicks into
place.
Adjust the position of the protective guard (9) to meet the
requirements of the operation. To do this, push the unlock-
ing lever (1) upward and rotate the protective guard (9) into
the required position.
Bosch Power Tools 1 609 92A 6A0 | (11.02.2022)
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWS 17-125 TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 17-125 TS in the language / languages: All languages as an attachment in your email.

The manual is 16.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info