Manual Bosch GWS 15-125 CITH (page 22 of 156) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

79075

Zoom out

Zoom in

1/156

English | 231 609 929 L08 • 12.1.07

The vibration emission level given in

this information sheet has been meas-

ured in accordance with a standard-

ised test given in EN 60745 and may be used to

compare one tool with another.

The vibration emission level will vary because of the

ways in which a power tool can be used and may

increase above the level given in this information sheet.

This could lead to a significant underestimate of expo-

sure when the tool is used regularly in such a way.

Note: To be accurate, an estimation of the level of

exposure to vibration experienced during a given period

of work should also take into account the times when

the tool is switched off and when it is running but not

actually doing the job. This may significantly reduce the

exposure level over the total working period.

Declaration of Conformity

We declare under our sole responsibility that this

product is in conformity with the following standards

or standardization documents: EN 60745 according

to the provisions of the directives 89/336/EEC,

98/37/EC.

18.12.2006, Robert Bosch GmbH, Power Tools Division

D-70145 Leinfelden-Echterdingen

Assembly

Mounting the Protective Devices

f Before any work on the machine itself, pull

the mains plug.

Protection Guard for Sanding

Place the protection guard 12

onto the spindle collar as

shown in the illustration. The

triangle marks on the protec-

tion guard must correspond

with the respective marks on

the gear case.

Press the protection guard 12

onto the spindle collar until the

shoulder of the protection

guard is seated against the

flange of the machine, and turn

the protection guard until it can

clearly be heard to engage.

Adjust the position of the protection guard 12 to the

requirements of the work process. For this, press the

release lever 1 upward and turn the protection guard

12 to the required position.

f Adjust the protection guard 12 in such a

manner that sparking is prevented in the

direction of the operator.

f The protection guard 12 may be turned only

upon actuation of the release lever 1! Other-

wise the power tool may not continue to be

used under any circumstances and must be

taken to an after-sales service agent.

Note: The encoding keys on the protection guard 12

ensure that only a protection guard that fits the

machine type can be mounted.

Protection Guard for Cutting

f For cutting metal, always work with the pro-

tection guard for cutting 13.

f For cutting stone, always work with the cut-

ting guide with dust extraction protection

guard 20.

The protection guard for cutting 13 is mounted in the

same manner as the protection guard for sanding 12.

Extraction Hood for Sanding

The extraction hood 7 can be used for low-dust sand-

ing of paint, varnish and plastics in conjunction with

the carbide grinding head 9 or the rubber sanding

plate 16 with a sanding sheet 17. The extraction hood

7 is not suitable for working metals.

A suitable Bosch vacuum cleaner can be connected

to the extraction hood 7.

The extraction hood 7 is mounted in the same manner

as the protection guard 12. The brush collar is

exchangeable.

Auxiliary Handle

f Operate your machine only with the auxiliary

handle 5.

Screw the auxiliary handle 5 on the right or left of the

machine head depending on the working method.

Vibration-dampening Auxiliary Handle

The vibration-dampening auxiliary handle reduces the

vibrations, making operation more comfortable and

secure.

f Do not make any alterations to the auxiliary

handle.

Do not continue to use an auxiliary handle if it

is damaged.

Dr. Egbert Schneider

Senior Vice President

Engineering

Dr. Eckerhard Strötgen

Head of Product

Certification

WARNING

OBJ_BUCH-165-003.book Page 23 Friday, January 12, 2007 9:16 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 15-125 CITH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch GWS 15-125 CITH

Bosch GWS 15-125 CITH User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 156 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GWS 15-125 CITH Manual

Product: