786154
12
Zoom out
Zoom in
Previous page
1/171
Next page
12 | English
uAlways wait until the power tool has come to a com-
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
uIn case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
uDo not open the battery. There is a risk of short-circuit-
ing.
uThe battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
uOnly use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for screwing in and loosening
screws.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Screwdriver bita)
(2) Stop sleeve
(3) Adjusting sleeve for screw depth stop
(4) Screw depth stop
(5) Rotational direction switch
(6) Battery release button
(7) Batterya)
(8) Handle (insulated gripping surface)
(9) Worklight
(10) On/off switch
(11) Universal bit holdera)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless screwdriver GTB 12V-11
Article number 3601JE40..
Rated voltage V= 12
No-load speedA) min-1 0–3 000
Max. torque, hard screwdriv-
ing application according to
ISO 5393A)
Nm 3
Tool holder ¼" internal
hexagon
Max. screw diameter mm 4
Weight according to
EPTA-Procedure 01:2014B) kg 0.91–1.1
Recommended ambient tem-
perature during charging °C 0to+35
Permitted ambient temperat-
ure during operation and dur-
ing storage
°C –20to+50
Recommended rechargeable
batteries GBA 12V...
Recommended chargers GAL 12...
GAX 18...
A) Measured at 20–25°C with rechargeable battery GBA 12V
2.0Ah.
B) Measured withGBA 12V 2.0Ah andGBA 12V 6.0Ah.
Noise/Vibration Information
Noise emission values determined according to
EN62841-2-2.
Typically the A-weighted noise level of the power tool is:
Sound pressure level 74 dB(A); sound power level 85
dB(A). Uncertainty K=3dB.
Wear hearing protection
Total vibration values ah (triax vector sum) and uncertainty K
determined according to EN62841-2-2:
Screwdriving: ah < 2.5 m/s2, K = 1.5 m/s2.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
1 609 92A 7PT | (02.05.2022) Bosch Power Tools
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GTB 12V-11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GTB 12V-11 in the language / languages: All languages as an attachment in your email.

The manual is 3.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info