Manual Bosch gss 230 a (page 20 of 254) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

390110

Zoom out

Zoom in

1/254

20 | English

2 609 932 790 | (6.12.10) Bosch Power Tools

Specialty Sanding Plates

You can replace the supplied sanding plate 9

with a specialty sanding plate, which is available

as an accessory.

The specialty sanding plate is attached in the

same manner as the one supplied.

Attach and remove the respective sanding

sheets in the same manner as when changing

original sanding sheets.

Extended Sanding Plate, Rectangular, Thin

(GSS 230 A/GSS 230 AE) (see figure G)

Use of the rectangular, thin, extended sanding

plate 22 enables sanding at hard-to-reach loca-

tions and narrow interspaces, e. g. on window

and door sills, grooves or behind radiators or

water pipes.

To mount the rectangular, thin, extended sand-

ing plate 22, use the corresponding screws 24.

Extended Sanding Plate, Triangular

(GSS 230 A/GSS 230 AE) (see figure H)

Use of the extended triangular sanding plate 26

enables sanding in edges and corners.

Finish-sanding Plate (without velcro backing)

(GSS 230 AE/GSS 280 AE) (see figure D)

When operating mainly with standard sanding

sheets without velcro backing, it is recommend-

ed to use the finish-sanding plate without velcro

backing. Due to its plane sanding plate surface,

optimum results are achieved, especially for fin-

ish sanding.

Auxiliary Handle

The auxiliary handle 1 enables convenient han-

dling and optimal distribution of power, espe-

cially at high removal rates.

Fasten the auxiliary handle 1 with screw 2 to the

casing.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V

can also be operated with 220 V.

Switching On and Off

To start the machine, press the On/Off switch 4

and keep it pressed.

To lock the pressed On/Off switch 4, press the

lock-on button 5.

To switch off the machine, release the On/Off

switch 4 or when it is locked with the lock-on

button 5, briefly press the On/Off switch 4 and

then release it.

Preselecting the Orbital Stroke Rate

(GSS 230 AE/GSS 280 AE)

With the thumbwheel for preselection of the or-

bital stroke rate 3, you can preselect the re-

quired orbital stroke rate, even during opera-

tion.

The required stroke rate depends on the materi-

al and the working conditions and can be deter-

mined through practical testing.

Working Advice

f Wait until the machine has come to a stand-

still before placing it down.

The removal capacity during sanding is mainly

determined by the selection of the sanding

sheet as well as the preselected orbital stroke

rate (GSS 230 AE/GSS 280 AE).

Only flawless sanding sheets achieve good

sanding capacity and extend the service life of

the machine.

Pay attention to apply uniform sanding pres-

sure; this increases the working life of the sand-

ing sheets.

Intensifiying the sanding pressure does not lead

to an increase of the sanding capacity, but to in-

creased wear of the machine and the sanding

sheet.

OBJ_BUCH-426-004.book Page 20 Monday, December 6, 2010 8:24 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gss 230 a in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gss 230 a Manual

Product: