Manual Bosch gss 230 a (page 19 of 254) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

390110

Zoom out

Zoom in

1/254

English | 19

Bosch Power Tools 2 609 932 790 | (6.12.10)

When vacuuming dry dust that is especially det-

rimental to health or carcinogenic, use a special

vacuum cleaner.

Replacing the Sanding Sheet

When attaching a new sanding sheet, remove

any dust or debris from the sanding plate 9 (e. g.

with a brush).

To ensure optimum dust extraction, pay atten-

tion that the punched holes in the sanding sheet

match with the holes in the sanding plate.

Sanding Sheets with Velcro Backing

(see figure C)

The sanding plate 9 is fitted with Velcro backing

for quick and easy fastening of sanding sheets

with Velcro adhesion.

Before attaching the sanding sheet 19, free the

Velcro backing of the sanding plate 9 from any

debris by tapping against it in order to enable

optimum adhesion.

Position the sanding sheet 19 flush alongside

one edge of the sanding plate 9, then lay the

sanding sheet onto the sanding plate and press

firmly.

To remove the sanding sheet 19, grasp it at one

of the tips and pull it off from the sanding plate

Sanding Sheets without Velcro Backing

(see figure D)

Lightly lift and unlatch the sanding-sheet clamp

Guide the sanding sheet 19 under the opened

rear clamping bracket 10 to the stop and clamp

the sanding sheet by reinserting the sanding-

sheet clamp 8.

Fold the sanding sheet 19 firmly around the

sanding plate. Guide the other end of the sand-

ing sheet 19 under the open front clamping

bracket 10 and clamp the sanding sheet by rein-

serting the sanding-sheet clamp 8.

Sanding sheets without holes, e. g. from rolls or

by the meter, can be punctured with the perfo-

rating tool 20 for use with dust extraction. For

this, press the machine with the mounted sand-

ing sheet onto the perforating tool

(see figure E).

To remove the sanding sheet 19, unlatch the

sanding-sheet clamp 8 and pull out the sanding

sheet.

Selecting the Sanding Sheet

Depending on the material to be worked and the

required rate of material removal, different

sanding sheets are available:

Replacing the Sanding Plate

(see figure F)

The sanding plate 9 can be replaced, if required.

Unscrew the 6 screws 21 completely and re-

move the sanding plate 9. Attach the new sand-

ing plate 9 and tighten the screws again.

Grain size

For the working of all

wooden materials

40—240

For coarse-sanding, e. g.

of rough, unplaned

beams and boards

coarse 40, 60

For face sanding and

planing small irregulari-

ties

medium 80, 100,

120

For finish and fine sand-

ing of hard woods

fine 180, 240

For the working of

paint/enamel coats or

primers and fillers

40—320

For sanding off paint coarse 40, 60

For sanding primer medium 80, 100,

120

For final sanding of prim-

ers before coating

fine 180,

240, 320

OBJ_BUCH-426-004.book Page 19 Monday, December 6, 2010 8:24 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gss 230 a in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gss 230 a Manual

Product: