Manual Bosch GSL 2 (page 17 of 184) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544278

Zoom out

Zoom in

1/184

English | 17

Bosch Power Tools 1 618 C00 75G | (10.12.12)

Evaluating Measuring Results (see figures D – G)

The two laser beams indicate, whether the surface is at the

same height as the reference point (see “Aligning the Height of

the Measuring Tool”, page 16):

– All points, at which both laser beams coincide exactly above

each other, are at the same height as the reference point.

– When two beams can be seen next to each other or when the

laser beams are interrupted, the height of the floor surface

deviates with respect to the reference point at this location.

To measure the deviation of the floor surface, position the laser

target plate 10 at the location to be checked. Turn the laser tar-

get plate in such a manner that the lefthand laser beam coin-

cides with the left reference line of the laser target plate. Slide

the upper part of the laser target plate upward or downward,

until the tip 11 of the laser target plate rests on the location to

be measured. The height deviation between the reference

point and the measuring point can be read in mm via the posi-

tion of the righthand laser beam on the laser target plate.

When both laser beams run apart at a constant angle on the

floor surface, the floor surface is inclined.

Working Advice

 Pay attention that the complete width of the laser

beams coincide exactly over each other. The width of

the laser beams changes with the distance.

Transporting the Measuring Tool

The handle 3 can be used for easier transport of the measur-

ing tool. Fold the handle up as required.

Laser Viewing Glasses (Accessory)

The laser viewing glasses filter out the ambient light. This

makes the red light of the laser appear brighter for the eyes.

 Do not use the laser viewing glasses as safety goggles.

The laser viewing glasses are used for improved visualisa-

tion of the laser beam, but they do not protect against laser

radiation.

 Do not use the laser viewing glasses as sun glasses or in

traffic. The laser viewing glasses do not afford complete

UV protection and reduce colour perception.

Recommendations for Optimal Handling of the

Battery Pack

Protect the battery pack against moisture and water.

Store the battery pack only within a temperature range be-

tween 0 °C and 50 °C. As an example, do not leave the bat-

tery pack in the car in summer.

A significantly reduced working period after charging indi-

cates that the battery pack is used and must be replaced.

Observe the notes for disposal.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the measuring tool itself (e.g.

assembling, maintenance, etc.) as well as when trans-

porting and storing, remove the battery pack or the

batteries from the measuring tool. Danger of injury

when accidentally actuating the On/Off switch.

Store and transport the surface laser only in the supplied case.

Keep the surface laser and remote control clean at all times.

Do not immerse the surface laser and remote control into wa-

ter or other fluids.

Wipe off debris using a moist and soft cloth. Do not use any

cleaning agents or solvents.

Regularly clean the surfaces at the exit opening of the laser in

particular, and pay attention to any fluff of fibres.

If the surface laser or remote control should fail despite the

care taken in manufacture and testing, repair should be car-

ried out by an authorised customer services agent for Bosch

power tools. Do not open the surface laser and the remote

control yourself.

In all correspondence and spare parts orders, please always

include the 10-digit article number given on the type plate of

the surface laser and remote control.

For repairs, only send in the surface laser in the case.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions

concerning our products and their accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: (0844) 7360109

Fax: (0844) 7360146

E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: (01) 4666700

Fax: (01) 4666888

OBJ_BUCH-1545-005.book Page 17 Monday, December 10, 2012 11:06 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSL 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GSL 2 Manual

Product: