544371

Bosch GSK 64 Manual

21
Zoom out
Zoom in
Previous page
1/218
Next page
English | 21
Bosch Power Tools 1 609 929 X30 | (22.3.11)
Accessories
For more information on the complete quality accessories program,
please refer to the Internet under www.bosch-pt.com or contact your
specialist shop.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concerning mainte-
nance and repair of your product as well as spare parts. Exploded views
and information on spare parts can also be found under:
www.bosch-pt.com
Our customer service representatives can answer your questions con-
cerning possible applications and adjustment of products and accesso-
ries.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
The nails are driven in too deep.
The rated pressure of the compressed-air supply is
too high.
– Reduce the compressed-air supply. 4 bar may not
be fallen below.
The depth stop is set too deep. – Adjust the depth stop to the desired depth.
(See “Adjusting the Depth Stop”, page 18)
The buffer is worn. – Contact an authorised service agent for Bosch
power tools.
Have the component replaced there.
The nails are not driven in deep enough.
The rated pressure of the compressed-air supply is
too low.
– Increase the compressed-air supply. 8 bar may
not be exceeded.
The depth stop is set too high. – Adjust the depth stop to the desired depth.
(See “Adjusting the Depth Stop”, page 18)
The length and diameter of supply-air hose 15 do not
correspond with the data of this pneumatic tool.
– Use a supply-air hose with the correct dimensions.
(See “Technical Data”, page 16)
The supply-air hose 15 is bent/creased. – Correct the bend/crease in the supply-air hose.
The pneumatic tool skips nails or has a
too large cycle feed.
The fasteners being used are not permitted. – Use only original accessories.
Only the fasteners (nails, staples, etc.) specified
in table “Technical Data” may be used.
The magazine 10 is not operating correctly. – Clean and lubricate the magazine slider 11 as re-
quired and make sure that the magazine 10 is not
dirty/soiled.
The spring of the magazine slider is too week or de-
fective.
– Contact an authorised service agent for Bosch
power tools.
Have the component replaced there.
The sealing ring of the piston is worn or damaged. – Contact an authorised service agent for Bosch
power tools.
Have the component replaced there.
Frequent jamming of nails in the shot
duct.
The fasteners being used are not permitted. – Use only original accessories.
Only the fasteners (nails, staples, etc.) specified
in table “Technical Data” may be used.
– Contact an authorised service agent for Bosch
power tools.
The driven nails are bent.
The driver blade is damaged. – Contact an authorised service agent for Bosch
power tools.
Have the component replaced there.
Contrary to working with normal operat-
ing speed, the nails are not driven in
deep enough at higher operating speed.
The interior diameter of the supply-air hose is too
low.
– Use a supply-air hose with the correct dimensions.
(See “Technical Data”, page 16)
The compressor is not suitable for fast operating
speeds.
– Use a compressor that is sufficiently dimensioned
for the number of connected pneumatic tools and
the operating speed.
Problem Cause Corrective Measure
OBJ_BUCH-1302-001.book Page 21 Tuesday, March 22, 2011 11:17 AM
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GSK 64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSK 64 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info